topic Re: -- Terminal server port parameters -- in Communications and Wireless

-- Terminal server port parameters --

OLIVA_1 — Tue, 01 Jul 2003 16:13:12 GMT

Hello,

I need to connect a terminal server to a HP server D390 HP-UX 10.20.

I need to know which values must be set up to the terminal server port...
Usually the following values are enough :
- Baud Rate : 9600 bps
- Data Size : 8
- Stop Bit : 1
- Parity : none
- Pace (Handshake) xon/xoff

But it seems it doesn't work this time...

Someone can help me and know how can I check the currently values set up on my server ?

Thanks,

Re: -- Terminal server port parameters --

Hai Nguyen_1 — Tue, 01 Jul 2003 16:16:12 GMT

9600-8-N-1-N

Hai

Re: -- Terminal server port parameters --

Rodney Hills — Tue, 01 Jul 2003 16:26:05 GMT

When you say terminal server, are you talking about a networked DTC?

If you are doing a modem, specifying baud rate 9600 default to 7 bit. See /etc/gettydefs for baud rates and settings.

HTH

-- Rod Hills

Re: -- Terminal server port parameters --

Bill Hassell — Tue, 01 Jul 2003 23:44:04 GMT

The 9600-8-none-1 and XON/XOFF are standard and I assume you are connecting the D390's console to the server for remote access. In most cases, you will just need a crossover cable to reverse pins 2 and 3. I keep a 9pin and a 25pin crossover adapter (aka null modem) just for this purpose. If it doesn't work with the existing cables. just insert the crossover adapter.

Re: -- Terminal server port parameters --

Keith Bevan_1 — Wed, 02 Jul 2003 07:58:16 GMT

Oliva,

What is the make and model of the Terminal Server ?

Keith

Re: -- Terminal server port parameters --

OLIVA_1 — Wed, 02 Jul 2003 08:39:34 GMT

Rodney,

Sorry I don't know what is a networked DTC ??? A terminal server is device on which you can connect a server console and so you obtain a remote access console.

Keith,

I will ask to engineer on site these informations.

Re: -- Terminal server port parameters --

OLIVA_1 — Thu, 03 Jul 2003 06:03:21 GMT

Keith,

The USTS is a Cisco 2610 router.

Re: -- Terminal server port parameters --

Keith Bevan_1 — Mon, 07 Jul 2003 10:56:54 GMT

You may wish to check out the cisco website for router setup information :-

http://www.cisco.com/en/US/products/hw/routers/ps259/prod_technical_reference09186a00800a8535.html#xtocid14

Keith