topic Re: Error code 39 Windows cannot load device for this hardware in Communications and Wireless

Error code 39 Windows cannot load device for this hardware

Asha_1 — Mon, 20 Oct 2003 11:03:33 GMT

When I try to Install the 54g wireless network adaptor manufactured by Belkin, I get this error in device manager as
"Code 39: Windows cannot load device for this driver."
Operating system: Windows XP home addition
The steps that I carried out is aas follows:
1. I removed the card using the deive manager and tried reinstalling ( with installation of the software used for managing the wireless card first as recommended by the manufacturer) - it gives me the error: Setup is interrupted unable to complete the installation.
2. I check in the device manager and the card is not installed.
3. I tried reinstalling only the drivers using the found new hardware wizard - it shows up a blue screen with error "Hardware malfunction"
4. I tried different PCI slot yet the same error.

Do you have any resolutions. I would be happy to hear from you.

Re: Error code 39 Windows cannot load device for this hardware

Jerome Henry — Mon, 20 Oct 2003 12:16:49 GMT

If your setup goes thru up to the time you have to insert your card, and then you get this message, my 2cents is that you have a deficient hardware, that should be changed.
I suppose you have latest driver.

J

Re: Error code 39 Windows cannot load device for this hardware

Ron Kinner — Mon, 20 Oct 2003 14:06:41 GMT

Do you have the latest upgrades from

http://windowsupdate.microsoft.com

and the latest software from Belkin?

http://web.belkin.com/support/download/download.asp?category=9〈=1&mode=

if so send it back as being defective.

Ron