https://community.hpe.com/t5/communications-and-wireless/520wl-setup-problems/m-p/3157482#M2238 Hi All,<BR /><BR />I am having problems setting up a 520WL AP with 2.1.2 firmware in the UK.<BR />The WLAN is visable on the client machines but upon connection I am getting lost network packets ( loss and long ms on a ping). Distance is around 5m from AP. When I setup our old existing AP ( buffalo ) I get no packet loss ( this is disabled when using 520's).<BR /><BR />I have changed the following :<BR /><BR />chan ( auto and preset ) - AP and client<BR />ap area size<BR />ssid ( various names )<BR /><BR />I have tried 2 different 520WL's and get the same problem - any ideas ?<BR /><BR />Regard <BR /><BR />Rich Tue, 06 Jan 2004 14:55:02 GMT richard sanderson 2004-01-06T14:55:02Z https://community.hpe.com/t5/communications-and-wireless/520wl-setup-problems/m-p/3157482#M2238 Hi All,<BR /><BR />I am having problems setting up a 520WL AP with 2.1.2 firmware in the UK.<BR />The WLAN is visable on the client machines but upon connection I am getting lost network packets ( loss and long ms on a ping). Distance is around 5m from AP. When I setup our old existing AP ( buffalo ) I get no packet loss ( this is disabled when using 520's).<BR /><BR />I have changed the following :<BR /><BR />chan ( auto and preset ) - AP and client<BR />ap area size<BR />ssid ( various names )<BR /><BR />I have tried 2 different 520WL's and get the same problem - any ideas ?<BR /><BR />Regard <BR /><BR />Rich Tue, 06 Jan 2004 14:55:02 GMT https://community.hpe.com/t5/communications-and-wireless/520wl-setup-problems/m-p/3157482#M2238 richard sanderson 2004-01-06T14:55:02Z