topic 420 set up in Communications and Wireless

420 set up

Brian Chipman — Thu, 10 Aug 2006 22:18:20 GMT

We are having a devil of a time getting ten of these units set up. The issue is the authentication using the WEP key. The WEP key is set up as we want it but the authentication process is at the default of open key. We must have a shared key. Does anyone know how we can make it a shared key?

Re: 420 set up

Mohieddin Kharnoub — Fri, 11 Aug 2006 11:02:56 GMT

Hi Brian

Do yo uwant to configure the ProCurve Access Point 420ww to have WEP key ?

If yyes, then what you need is to configure the AP with the Security Suit 2, which is: Static WEP shared keys used for encryption (open authentication).

Is that what you want ???

Good Luck !!!

Re: 420 set up

Matt Hobbs — Sun, 13 Aug 2006 21:19:49 GMT

HP420(config)#interface wireless g
Enter Wireless configuration commands, one per line.
HP420(if-wireless-g)#ssid index 1
HP420(if-wireless-g-ssid-1)#security-suite shared-key
HP420(if-wireless-g-ssid-1)#transmit-key-wep 2 128 ascii
1234512345abc
HP420(if-wireless-g-ssid-1)#