topic Mobility Manager won't detect radios in Communications and Wireless

Mobility Manager won't detect radios

Vince Butler — Tue, 20 Mar 2007 17:20:28 GMT

I am using PCM+ with Mobility Manager (licensed). I have added my first two ProCurve 420 access points, which I assigned manual IPs and used manual discovery to detect them. I have configured them for SNMPv3 and SSH (SNMPv1/2 and Telnet are disabled). When I run Test Communications on these devices from PCM+ it tests successfully for both CLI and SNMP. I have the mobility preferences set for a 15 min interval, but for some reason the radios will not show up in PCM+ - only the devices. So, I am unable to configure any wireless settings from the program. Is there some reason why this isn't working?

Re: Mobility Manager won't detect radios

Paul_Go — Wed, 21 Mar 2007 20:34:00 GMT

My Mobility Manager, when installed, took over 72 hours to detect a dozen 420 radios on a not very large network. I also lowered the data collection interval, but this didn't help.

Paul.

Re: Mobility Manager won't detect radios

Vince Butler — Thu, 22 Mar 2007 11:37:01 GMT

Yeah, mine finally showed up after a day or two. Strange that it takes so long - the documentation indicates that they should get detected very quickly. Guess I just need to be more patient.