https://community.hpe.com/t5/communications-and-wireless/j8130a-wireless-access-point-dchp/m-p/3971694#M5690 Forgive this post but being a bit new to higher end equipment I'm going to ask a few stupid questions, such as this. I have 3 new J8130A Wireless Access Point 420's and i need them to give out DHCP automatically, being as they are WAP's and not routers, how should i go about doing this. <BR />Thanks in advance Wed, 28 Mar 2007 22:58:20 GMT ServerGuy01 2007-03-28T22:58:20Z https://community.hpe.com/t5/communications-and-wireless/j8130a-wireless-access-point-dchp/m-p/3971694#M5690 Forgive this post but being a bit new to higher end equipment I'm going to ask a few stupid questions, such as this. I have 3 new J8130A Wireless Access Point 420's and i need them to give out DHCP automatically, being as they are WAP's and not routers, how should i go about doing this. <BR />Thanks in advance Wed, 28 Mar 2007 22:58:20 GMT https://community.hpe.com/t5/communications-and-wireless/j8130a-wireless-access-point-dchp/m-p/3971694#M5690 ServerGuy01 2007-03-28T22:58:20Z https://community.hpe.com/t5/communications-and-wireless/j8130a-wireless-access-point-dchp/m-p/3971695#M5691 Hi<BR /><BR />The HP ProCurve 420 Wireless Access Points are an Enterprise ones, and it doesn't have a DHCP server built in.<BR /><BR />You need an External DHCP service to give clients IP Addresses.<BR /><BR />Good Luck !!! Wed, 28 Mar 2007 23:58:54 GMT https://community.hpe.com/t5/communications-and-wireless/j8130a-wireless-access-point-dchp/m-p/3971695#M5691 Mohieddin Kharnoub 2007-03-28T23:58:54Z