https://community.hpe.com/t5/communications-and-wireless/router-7102dl/m-p/4312946#M7007 Yep.....this is what i was forgetting.<BR />thanks! Wed, 26 Nov 2008 00:22:57 GMT shawn ebbs 2008-11-26T00:22:57Z https://community.hpe.com/t5/communications-and-wireless/router-7102dl/m-p/4312944#M7005 Hey folks...trying to get my router configured on my lan...I have 2 ethernet ports. 1 on my private network...and one for the public WAN internet.<BR /><BR />I cannot route to the internet.. I am currently using a netgear router...with the exact same setup...and it works no problem.<BR />I even tried the firewall wizard....specified my WAN port (being 0/2)...still nothing.<BR /><BR />I have attached my startup-config file...<BR />PLEASE HELP! Tue, 25 Nov 2008 21:16:32 GMT https://community.hpe.com/t5/communications-and-wireless/router-7102dl/m-p/4312944#M7005 shawn ebbs 2008-11-25T21:16:32Z https://community.hpe.com/t5/communications-and-wireless/router-7102dl/m-p/4312945#M7006 Shawn,<BR /><BR />You still need a default route!<BR /><BR />add: <BR />ip route 0.0.0.0 0.0.0.0 <ADDRESS of="" your="" sp=""><BR />(That is the other side. Your SP should have given you that address). I believe it would be x.x.x.185 because that's what you used for the ip default-gateway address).<BR /><BR />IP default-gateway is something different....<BR /><BR /><BR />Olaf<BR /><BR /></ADDRESS> Tue, 25 Nov 2008 23:54:28 GMT https://community.hpe.com/t5/communications-and-wireless/router-7102dl/m-p/4312945#M7006 Olaf Borowski 2008-11-25T23:54:28Z https://community.hpe.com/t5/communications-and-wireless/router-7102dl/m-p/4312946#M7007 Yep.....this is what i was forgetting.<BR />thanks! Wed, 26 Nov 2008 00:22:57 GMT https://community.hpe.com/t5/communications-and-wireless/router-7102dl/m-p/4312946#M7007 shawn ebbs 2008-11-26T00:22:57Z