https://community.hpe.com/t5/communications-and-wireless/finding-printers/m-p/4632550#M8024 hi docmur,<BR /><BR />I think better you post it under "Networking" catagory rather than under Printers.<BR />If you have the IP address and mac address I think a network guy can trace it and shut the port from the switch which is connected to this printer port. Try that way . if your labeling is proper at end user N/W port this method may help you Thu, 13 May 2010 04:09:44 GMT S-M-S 2010-05-13T04:09:44Z https://community.hpe.com/t5/communications-and-wireless/finding-printers/m-p/4632549#M8023 Hello<BR /><BR />I'm working on a network I'm trying to map out. It was designed before I started. When I try to tracepath or tracert the printer it shows up as 1 hop. I know the printer must run into a switch at some point, I just have no idea when it does or what switch it hooks into. Wed, 12 May 2010 15:31:13 GMT https://community.hpe.com/t5/communications-and-wireless/finding-printers/m-p/4632549#M8023 docmur 2010-05-12T15:31:13Z https://community.hpe.com/t5/communications-and-wireless/finding-printers/m-p/4632550#M8024 hi docmur,<BR /><BR />I think better you post it under "Networking" catagory rather than under Printers.<BR />If you have the IP address and mac address I think a network guy can trace it and shut the port from the switch which is connected to this printer port. Try that way . if your labeling is proper at end user N/W port this method may help you Thu, 13 May 2010 04:09:44 GMT https://community.hpe.com/t5/communications-and-wireless/finding-printers/m-p/4632550#M8024 S-M-S 2010-05-13T04:09:44Z