topic Re: Procurve VLAN problem in Communications and Wireless

Procurve VLAN problem

Carlo Jeddah — Mon, 18 Oct 2010 06:28:44 GMT

I have hp procurve 2626 on our network, my problem is that the remote hp switch 2626 doesn't work with VLAN 100 in which this is our VLAN for printer, but same configuration on same switch model this time direct fiber or utp uplink to our core and its works fine. I have cisco 1300 outdoor wireless in between the core and the remote switch. what configuration should i be doing on cisco and hp? note that other VLANs work fines e.g. management, dept. vlan. but not the VLAN 100. kindly answer my question i am stack on this matter. thanks

Re: Procurve VLAN problem

Shadow13 — Tue, 19 Oct 2010 12:24:02 GMT

from HP side make sure tha uplink ports are tagged on VLAN 100, from Cisco side i'm not sure if it support 802.1q or how the traffic passes between the 2 site through the AP so you have to check with Cisco on that.

Re: Procurve VLAN problem

Carlo Jeddah — Wed, 20 Oct 2010 04:13:34 GMT

HI, thanks for the reply. pls. find the config on hp switch.

hostname "WC8-SW2"
web-management management-url ""
ip default-gateway 10.40.10.11
snmp-server community "public" Unrestricted
snmp-server host 10.40.101.18 "public"
vlan 1
name "DEFAULT_VLAN"
untagged 25-26
no ip address
no untagged 1-24
exit
vlan 10
name "Management"
ip address 10.40.10.112 255.255.255.0
ip helper-address 10.40.100.31
tagged 25-26
exit
vlan 100
name "SVR&PRT"
ip helper-address 10.40.100.31
tagged 25-26
exit
vlan 144
name "LOGS-STRS"
untagged 1-24
ip helper-address 10.40.100.31
tagged 25-26
exit
spanning-tree
password manager

WC8-SW2#

and still if i connect static Ip on this vlan 100 it cannot be ping.

thanks.,

Re: Procurve VLAN problem

p3rlphr33k — Fri, 22 Oct 2010 13:28:33 GMT

As Shadow13 has already stated, you will need to configure the cisco to carry the vlan.

http://www.cisco.com/en/US/docs/wireless/access_point/350/configuration/guide/ap350ch4.html