https://community.hpe.com/t5/communications-and-wireless/420-ap-without-data-cable/m-p/5122884#M9111 so 530 is needed Sat, 09 Aug 2008 01:24:03 GMT abdullah.ali 2008-08-09T01:24:03Z https://community.hpe.com/t5/communications-and-wireless/420-ap-without-data-cable/m-p/5122881#M9108 Hi All,<BR /><BR />can we use the 420 wireless Access point without connecting a data cable into it. i mean can we configure it to take the signal from another access point then repeat it or forward it to cover wider area? Sat, 02 Aug 2008 17:14:39 GMT https://community.hpe.com/t5/communications-and-wireless/420-ap-without-data-cable/m-p/5122881#M9108 abdullah.ali 2008-08-02T17:14:39Z https://community.hpe.com/t5/communications-and-wireless/420-ap-without-data-cable/m-p/5122882#M9109 Hi<BR /><BR />Only the 530 APs can do that, but not the 420s.<BR /><BR />Good Luck !!! Sun, 03 Aug 2008 16:38:02 GMT https://community.hpe.com/t5/communications-and-wireless/420-ap-without-data-cable/m-p/5122882#M9109 Mohieddin Kharnoub 2008-08-03T16:38:02Z https://community.hpe.com/t5/communications-and-wireless/420-ap-without-data-cable/m-p/5122883#M9110 Hi Abdullah,<BR /><BR />WDS, or wireless bridging, is a feature on the AP530 that would allow for forwarding a wireless signal from one AP530 to another. Unfortunately, the AP420 does not have WDS as an option.<BR /> Tue, 05 Aug 2008 18:58:31 GMT https://community.hpe.com/t5/communications-and-wireless/420-ap-without-data-cable/m-p/5122883#M9110 Jarret Workman 2008-08-05T18:58:31Z https://community.hpe.com/t5/communications-and-wireless/420-ap-without-data-cable/m-p/5122884#M9111 so 530 is needed Sat, 09 Aug 2008 01:24:03 GMT https://community.hpe.com/t5/communications-and-wireless/420-ap-without-data-cable/m-p/5122884#M9111 abdullah.ali 2008-08-09T01:24:03Z