https://community.hpe.com/t5/communications-and-wireless/wireless-lan/m-p/2513250#M95 Dear Sir, <BR /> <BR />I've bought a Compaq WL100 11 Mbps Wireless LAN PC Card <BR />installed to my iPAQ, and Compaq WL200 11 Mbps Wireless LAN PCI Card installed to my PC. <BR /> <BR />After proceed all the installation process and all the cards can be identified, I execute the Wireless Lan configuration utility. I choose the mode of "Infrastructure" in both the pc and handheld. Unfortunately, the indication always give me "red", that means I cannot link my handheld to the pc successfully. The state was always stay at scanning. <BR /> <BR />I don't know what's wrong is it.. <BR /> <BR />Best Regard Tue, 03 Apr 2001 23:00:00 GMT Ayman Altounji 2001-04-03T23:00:00Z https://community.hpe.com/t5/communications-and-wireless/wireless-lan/m-p/2513250#M95 Dear Sir, <BR /> <BR />I've bought a Compaq WL100 11 Mbps Wireless LAN PC Card <BR />installed to my iPAQ, and Compaq WL200 11 Mbps Wireless LAN PCI Card installed to my PC. <BR /> <BR />After proceed all the installation process and all the cards can be identified, I execute the Wireless Lan configuration utility. I choose the mode of "Infrastructure" in both the pc and handheld. Unfortunately, the indication always give me "red", that means I cannot link my handheld to the pc successfully. The state was always stay at scanning. <BR /> <BR />I don't know what's wrong is it.. <BR /> <BR />Best Regard Tue, 03 Apr 2001 23:00:00 GMT https://community.hpe.com/t5/communications-and-wireless/wireless-lan/m-p/2513250#M95 Ayman Altounji 2001-04-03T23:00:00Z