topic Re: EFI SHell MAP shows not fsX map file in Integrity Servers

EFI SHell MAP shows not fsX map file

Aungshuman Paul — Wed, 21 Apr 2010 12:25:33 GMT

Hi ,

We faced a problem on HPUX RX2660 Server booting problem. It failed to auto boot. Then we tried to boot it from HPUX EFI shell. But in EFI shell mode, when we execute it shows :
EFI Shell UEFI version 2.00 [14.62]
Device mapping table
blk0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)
blk1 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Scsi(Pun7,Lun0)
blk2 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C5000CB08819,Lun0)
blk3 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C5000CB197CD,Lun0)
blk4 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C5000CABE309,Lun0)
blk5 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C5000CAC36B5,Lun0)
blk6 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C5000CB151C5,Lun0)
blk7 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C5000CB0DA79,Lun0)
blk1:\>

There is no fs0 or like this. Please what should be the issue. The system was up and runnign we just upgrade the RAM os the system.

BR\\

Aungshu

Re: EFI SHell MAP shows not fsX map file

Torsten. — Wed, 21 Apr 2010 12:34:04 GMT

Is there an integrated RAID configured?
I would check if it is disabled (for any unknown reason) and try to activate it.

Re: EFI SHell MAP shows not fsX map file

Aungshuman Paul — Sun, 09 May 2010 04:49:11 GMT

Hi,

Actually someone try to create a VG on wrong PV ( which is the system boot disk):

# grep -i lvm /var/adm/syslog/OLDsyslog.log
Dec 6 19:58:54 inctst01 LVM[6900]: vgcreate -s 64 /dev/vg02 /dev/dsk/c1t6d0

After that long time the system was not powered down. When it was down it did not find its boot disk, even its EFI file system is corrupted. The system was restored by the HELP of HP Backline. They boot the system using the OS dvd in recovery mode. Then restore the EFI file system.

Aungshu