https://community.hpe.com/t5/integrity-servers/disable-bmc/m-p/3540882#M11413 JUP<BR />See pages 61-64 of this document.<BR /><BR /><A href="http://docs.hp.com/en/rx2620_ops/rx2620_ops.pdf" target="_blank">http://docs.hp.com/en/rx2620_ops/rx2620_ops.pdf</A><BR /><BR />I hope it helps.<BR /><BR />Good Luck - Tim Fri, 13 May 2005 13:53:49 GMT timmy b. 2005-05-13T13:53:49Z https://community.hpe.com/t5/integrity-servers/disable-bmc/m-p/3540881#M11412 Hi<BR /><BR />is there a way to disable the BMC on the serial port of a rx2620 itanium system ?<BR /><BR />We have an app on a PC connected to the serial port of the rx2620 server and its sending a sequence of characters that forces the port to enter into BMC and thus stopping the host receiving the required info. I want to disable the BMC on the port.<BR /><BR />Does anyone have any ideas on how to do this ?<BR /><BR />Thanks in advance<BR />JUP Mon, 09 May 2005 20:39:52 GMT https://community.hpe.com/t5/integrity-servers/disable-bmc/m-p/3540881#M11412 JUP 2005-05-09T20:39:52Z https://community.hpe.com/t5/integrity-servers/disable-bmc/m-p/3540882#M11413 JUP<BR />See pages 61-64 of this document.<BR /><BR /><A href="http://docs.hp.com/en/rx2620_ops/rx2620_ops.pdf" target="_blank">http://docs.hp.com/en/rx2620_ops/rx2620_ops.pdf</A><BR /><BR />I hope it helps.<BR /><BR />Good Luck - Tim Fri, 13 May 2005 13:53:49 GMT https://community.hpe.com/t5/integrity-servers/disable-bmc/m-p/3540882#M11413 timmy b. 2005-05-13T13:53:49Z