topic Cannot see efi shell RX4640 in Integrity Servers

Cannot see efi shell RX4640

gjeko — Tue, 03 Jul 2012 17:21:36 GMT

First time user of this forum and integrity servers as well. Recently got my hands on a rx4640 box and want to install win 2003 server in it. I know that there is a smart disk that I have to download etc but my problem start from very beginning as the DVD room is not working (no led, no eject, nothing). I tried about 4 different DVD drives with same part number but same result. Then I read that I most reconnect the DVD drive from EFI shell. My problem is that I cannot access this shell. I have access to MP through serial and telnet (I was able to see the IP from MP-CM-LS). When I get to the console I see only one cursor blinking and no command can be executed. If anyone can help me access this shell it would be very helpful as at this point I don’t know how to proceed any further.

If it is helpful I’m posting the output of sysrev and the screen that I get when console.

Many thanks in advance.

                              Revision E.03.32

*************************************************************************
                         MP ACCESS IS NOT SECURE
Default MP users are currently configured and remote access is enabled.
Modify default users passwords or delete default users (see UC command)
                                    OR
            Disable all types of remote access (see SA command)
*************************************************************************

*************************************************************************
                           Your Certificate is expired.
               Use the SO command to generate a new certificate.
*************************************************************************

   MP MAIN MENU:

         CO: Console
        VFP: Virtual Front Panel
         CM: Command Menu
         CL: Console Log
         SL: Show Event Logs
         HE: Main Help Menu
          X: Exit Connection

MP> cm

        (Use Ctrl-B to return to MP main menu.)

MP:CM> sysrev

SYSREV

Current firmware revisions

MP FW     : E.03.32
BMC FW    : 04.06
EFI FW    : 05.48
System FW : 04.29

MP:CM>

   MP MAIN MENU:

         CO: Console
        VFP: Virtual Front Panel
         CM: Command Menu
         CL: Console Log
         SL: Show Event Logs
         HE: Main Help Menu
          X: Exit Connection

MP> co

        (Use Ctrl-B to return to MP main menu.)

- - - - - - - - - - Prior Console Output - - - - - - - - - -

- - - - - - - - - - - - Live Console - - - - - - - - - - - -

Re: Cannot see efi shell RX4640

S_Logan — Sat, 07 Jul 2012 07:50:40 GMT

Hi Gjeko,

You can perform the Power recycle activity to see what is the last boot message after the power recyle.

Before power recycle , Make sure the system in console mode.(MP>CO).

Please paste the boot message, as i understand the console output configured to VGA that is the reson you cant see the EFI shell.

So power recycle the system and see the boot messages and see where is the console output configured.

If it is configured in VGA , it has to be changed to serial and perform the installation activity.

HTH,

Surendar

Was the post useful?

Say Thank you by Clicking the WHITE KUDOS! Star.

For HP Guided Troubleshooting; http://www.hp.com/support/hpgt

Re: Cannot see efi shell RX4640

gjeko — Mon, 09 Jul 2012 08:46:17 GMT

Hi Surendar,

First I want to thank you for your reply.

I power cycled the machine many times and there were no messages shown regarding previous boot. Also connected monitor with keyboard and mouse but there was no signal on VGA. One thing I noticed was that the machine restarted 3 times every time I power cycled. I checked the system logs from web and there was a repeated message that the CPU was not able to boot. I checked the CPU physically and it looked OK. Only after a reset of MP with the button located in the back I was able to get a CPU boot and the boot manager finally showed up and the DVD is accessible. Downloading the HP smart setup right now so I guess now is OK,

Thanks again for you help,

Gjeko.

Re: Cannot see efi shell RX4640

S_Logan — Mon, 09 Jul 2012 09:47:23 GMT

Hi Gjeko,

It is good to hear the system is working fine, after the MP reset.

Thank you very much for your update.

HTH,

Surendar

Was the post useful?

Say Thank you by Clicking the WHITE KUDOS! Star.

For HP Guided Troubleshooting; http://www.hp.com/support/hpgt