https://community.hpe.com/t5/integrity-servers/internal-raid-on-rx8640/m-p/5283742#M11797 Hi,<BR /><BR />When I went to the shell command and ran the search command. It activated the F1 of the raid card. I was able to set it up and it is loading the OS now.<BR /><BR />Jon Thu, 02 Jun 2011 12:05:04 GMT Jon Steele 2011-06-02T12:05:04Z https://community.hpe.com/t5/integrity-servers/internal-raid-on-rx8640/m-p/5283741#M11796 Hi,<BR /><BR />I have installed a 6402 smart array card(309520-001) In an RX8640.<BR /><BR />I have the cable guide book. I have my cables corrctly attached.<BR /><BR />I am trying to load HPUX 11.i ver3 OS. I am having trouble making a boot disk to be able to install the OS.<BR /><BR />I can boot to my OS cd but it does not show any drives.<BR /><BR />I know I must be missing some steps, this raid card does not give me the hit F1 option to create my lun to load an OS too.<BR /><BR />Thanks<BR />Jon Thu, 02 Jun 2011 11:08:39 GMT https://community.hpe.com/t5/integrity-servers/internal-raid-on-rx8640/m-p/5283741#M11796 Jon Steele 2011-06-02T11:08:39Z https://community.hpe.com/t5/integrity-servers/internal-raid-on-rx8640/m-p/5283742#M11797 Hi,<BR /><BR />When I went to the shell command and ran the search command. It activated the F1 of the raid card. I was able to set it up and it is loading the OS now.<BR /><BR />Jon Thu, 02 Jun 2011 12:05:04 GMT https://community.hpe.com/t5/integrity-servers/internal-raid-on-rx8640/m-p/5283742#M11797 Jon Steele 2011-06-02T12:05:04Z