topic Re: EFI Shell in Integrity Servers

EFI Shell

Jonathan Grymes — Tue, 10 Sep 2013 02:27:05 GMT

Booting server to get EFI Shell. To determine sasflash version and display information about about 1068 and 1068E cards on the system. Every command I type returns invalid parameter.

System is HP-UX 11.23 (rx2660)

At the Shell prompt:

shell>sasflash

Invalid parameter

shell>sasflash -listall

Invalid parameter

P.S. this thread has been moved From HP-UX > System Administration to Servers > Integrity. - Hp Forum moderator

Re: EFI Shell

Torsten. — Tue, 10 Sep 2013 05:42:49 GMT

These commands are not built-in.

Use sasmgr from hp-ux, example:

$ sasmgr get_info -D /dev/sasd0
Driver Name : sasd
Bundle Version : B.11.31.01
Product Number : 399490-001
Hardware Path : 0/4/1/0
Health of HBA : ONLINE
PCI Vendor ID : 0x1000
PCI Device ID : 0x0054
PCI Subsystem Vendor ID : 0x3228
PCI Subsystem ID : 0x103c
PCI Revision ID : 0x0000
Max. PHYs supported : 8
Max. IO size : 1048576

*********************************************************************
***** HBA Specific information *****
*********************************************************************
HBA state : READY
Driver firmware dump available : NO
Driver firmware dump timestamp : N/A
Firmware Revision : 1.16.0.0

Re: EFI Shell

Jason_L — Thu, 10 Oct 2013 23:28:22 GMT

Sasflash is a utility that comes with the sas fw download. So it is not native to the efi shell. You can download (on mobile no link) put on a usb to execute at the efi.

You will have to change to the partition of usb disk. Usually it is fs0:

Re: EFI Shell

S_Logan — Thu, 17 Oct 2013 12:43:40 GMT

Hi ,

Please check this URL fro more infromation on SASflash and firmware driver:

SAS HBA EFI driver/firmware

sasflash.efi - EFI utility to update EFI driver and HBA firmware on Serial Attached SCSI adaptor based on LSI 1068

Regards,

S_Logan

Re: EFI Shell

lukai — Mon, 31 Mar 2014 03:09:18 GMT

thansk for share~