topic Re: rx1620 in Integrity Servers

rx1620

Domenico_5 — Wed, 26 Oct 2005 04:03:12 GMT

Hi guys

I want to configure lan console on my server.

I know well all steps to do this, but unfortunatelly I can't configure because on serial connection the server don't sent ctrl B.

any ideas?

Re: rx1620

RAC_1 — Wed, 26 Oct 2005 04:09:32 GMT

What do you use for serial connection?
When you press entre, do you get any prompt??
Check your settings.

1. Bits persecond-- 9600
2. Data Bits -- 8
3. Parity -- none
4. Stop bits -- 1
5. Flow Control -- none or Hardware

Re: rx1620

Domenico_5 — Wed, 26 Oct 2005 04:16:10 GMT

HI RAC

All correct, I configure those servers all day and use the same software with the same configuration.

When I try ctrl+B I can't see nothing, when hpux is started I see ^B.

It's sound like the server don't trap ctrl+B

Re: rx1620

Borislav Perkov — Wed, 26 Oct 2005 04:19:06 GMT

Try to reset the MP with the reset bottom.
Regards,
Borislav

Re: rx1620

Arunvijai_4 — Wed, 26 Oct 2005 04:42:05 GMT

This thread may help you,

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=594450

-Arun

Re: rx1620

Torsten. — Wed, 26 Oct 2005 10:56:54 GMT

Are you sure you have a MP?

This is not a joke, the MP/iLO is or was an option for some models in the entry server class:

http://h18000.www1.hp.com/products/quickspecs/12142_div/12142_div.HTML

Re: rx1620

Sameer_Nirmal — Wed, 26 Oct 2005 14:10:15 GMT

Hi,

I suspect you have iLO MP firmware version E.02.22 or later.

In the E.03.13 version, the problem with ctrl B is fixed.

Refer following doc.
http://www1.itrc.hp.com/service/cki/patchDocDisplay.do?patchId=COL7234-UX-32240-1

There is a patch PHSS_33092 available for system, BMC and iLO.