topic Re: efi shell password reset in Integrity Servers

efi shell password reset

Senthil Kumar .A_1 — Mon, 25 Aug 2014 02:36:26 GMT

hello admins,

Can anyone direct me to reset the EFI shell password .The server i'm handling is HP RX2600

P.S. This thread has been moved from HP 9000 to Servers > Integrity. -HP Forum Moderator

Robert-Jan Goossens — Tue, 15 Jun 2004 02:29:41 GMT

Hi,

HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide
Troubleshooting graphics and monitor problems

If you forgot the EFI password, it can be reset using the jumper on the system board. See the RX2600 Operation and Maintenance Guide.

http://h20000.www2.hp.com/bizsupport/CoreRedirect.jsp?targetPage=http%3A%2F%2Fh200006.www2.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Flpv38451%2Flpv38451.pdf

Hope this helps,
Robert-Jan

Jim Thomas_5 — Wed, 16 Jun 2004 10:32:51 GMT

I believe that the MP's "BP" command (must be in Admin mode and then Command "CM" mode) will reset the EFI shell password.