https://community.hpe.com/t5/integrity-servers/team-installed-inactive/m-p/3664104#M1284 Hi. <BR /><BR />I have one server rx2620 with two networks adapter. These adapters are in team of network cards.<BR /><BR />The network adapter "A" present problems. it is connected and it disconnected intermittently. Reviewing the aid the following message is observed:<BR /><BR />"INSTALLED INACTIVE. Adapter is installed and is operating properly, but is not active. Applies for teamed fault tolerant adapters only"<BR /><BR /><BR />I hope can help me.<BR /><BR />Thanks Thu, 03 Nov 2005 14:10:14 GMT Alberto Mendoza 2005-11-03T14:10:14Z https://community.hpe.com/t5/integrity-servers/team-installed-inactive/m-p/3664104#M1284 Hi. <BR /><BR />I have one server rx2620 with two networks adapter. These adapters are in team of network cards.<BR /><BR />The network adapter "A" present problems. it is connected and it disconnected intermittently. Reviewing the aid the following message is observed:<BR /><BR />"INSTALLED INACTIVE. Adapter is installed and is operating properly, but is not active. Applies for teamed fault tolerant adapters only"<BR /><BR /><BR />I hope can help me.<BR /><BR />Thanks Thu, 03 Nov 2005 14:10:14 GMT https://community.hpe.com/t5/integrity-servers/team-installed-inactive/m-p/3664104#M1284 Alberto Mendoza 2005-11-03T14:10:14Z https://community.hpe.com/t5/integrity-servers/team-installed-inactive/m-p/3664105#M1285 It seems that the team is configured for NFT. The messages shows that The adapter A is not active as it might have been configured as active standby.<BR />There might be intermittent failback occurance happening. <BR />Can you tell how the team is configured?<BR />Which version of Network configuration utility is being used?<BR />Which version of Network adapter drives are installed?<BR /> Fri, 04 Nov 2005 00:04:52 GMT https://community.hpe.com/t5/integrity-servers/team-installed-inactive/m-p/3664105#M1285 Sameer_Nirmal 2005-11-04T00:04:52Z