topic Re: RX7640 CPU4? in Integrity Servers

RX7640 CPU4?

Zammann — Fri, 11 Sep 2015 23:42:31 GMT

Hello all, I have an Alert level 3 message indicating CC chip fan failing.

Physical Location: Processor fan Cabinet 0 cell 0 CPU 4

The diagram on the srever shows CPU 0 to 3 locations

My question is, should I be looking at this like a Raid?

where as 0 is 1 and 3 would be CPU4.

Thank you for any help.

Re: RX7640 CPU4?

Torsten. — Sat, 12 Sep 2015 15:38:37 GMT

Your picture is showing CPU 0 and 2 installed, so it could be the fan in the middle (cell controller).

Could you post the exact error message together with a "ps" output from MP (cell0 and cabinet)?

Re: RX7640 CPU4?

Graziano_Grub — Fri, 02 Oct 2015 10:36:24 GMT

If the event you've seen in the MP FPL shows CC_FAN_FAIL, then Torsten. is right.
The issue is about the Cell Controller FAN (the one in the middle).
Just launch DE command on MP:CM> and look at the real current status of the CC Fan (you need to select PDHC and then the cell).

Kind Regards,

Graziano Palasciano