rx2800 P410i Controller

Carlo1 — Sun, 20 Sep 2015 07:11:19 GMT

I have a rx2800 integrity server with a Smart Array P410i Controller.

At start I have the Controller in HBA mode

How to change the mode in RAID?

I already update SAS io firmware at version 6.42, but the EFI Shell not recognize the "saupdate" command

the UEFI Revision is 2.30

thank you for the answer

best regards

Carlo

Re: rx2800 P410i Controller

Carlo1 — Sun, 20 Sep 2015 08:53:38 GMT

I solved!!!!

The problem was that i follow the instruction of installation:

Note: After installation is completed the firmware files from EFI partition should be manually deleted, to delete the files use "/usr/sbin/efi_rm -d /dev/rdisk/disk1_p1 /efi/hp/firmware/<file_name> " and to remove dir use "/usr/sbin/efi_rmdir -d /dev/rdisk/disk1_p1 /efi/hp/firmware/"

in this way i delete also the "saupdate.efi" file.

I copy in EFI this file and so I have the command.

fs0:\saupdate set_mode p410i raid

bye

Carlo

topic rx2800 P410i Controller in Integrity Servers

rx2800 P410i Controller

Re: rx2800 P410i Controller