https://community.hpe.com/t5/integrity-servers/server-integrity-screen-white-and-blue/m-p/6824585#M13086 <P>Is the server's power light green? Are there any error lights on the server?</P><P>For a keyboard-video-mouse (KVM) connection, you may need to connect to the console either through the serial port or the LAN cable and setup KVM rather than wired console.</P><P>For telnet, you must have a cable plugged into the console port in the back. This is different than the other ports which are controlled by HP-UX after it is booted. If there is a cable, do you know the IP address of the console? This should have been&nbsp;setup when your server was installed.</P><P>For a serial connection, you probably need a null-modem cable or adapter. Most serial cables are designed to plug into modems, not servers. To request the console prompt, type ctrl-B</P> Sat, 16 Jan 2016 21:51:03 GMT Bill Hassell 2016-01-16T21:51:03Z https://community.hpe.com/t5/integrity-servers/server-integrity-screen-white-and-blue/m-p/6824192#M13085 <P>hi</P><P>I am new in this job of managing servers, there is a server HP integrity rx2800 i4 that has installed an HP-UX operating system but when I turn only aparce hp screen in white and blue, do not let me make a boot.<BR />I tried to connect via telnet and ssh with putty but not connect<BR />Connect a serial cable to a lap top but does not identify<BR />I could help please tell me how to boot</P> Thu, 14 Jan 2016 19:54:49 GMT https://community.hpe.com/t5/integrity-servers/server-integrity-screen-white-and-blue/m-p/6824192#M13085 Manuel_Luffy 2016-01-14T19:54:49Z https://community.hpe.com/t5/integrity-servers/server-integrity-screen-white-and-blue/m-p/6824585#M13086 <P>Is the server's power light green? Are there any error lights on the server?</P><P>For a keyboard-video-mouse (KVM) connection, you may need to connect to the console either through the serial port or the LAN cable and setup KVM rather than wired console.</P><P>For telnet, you must have a cable plugged into the console port in the back. This is different than the other ports which are controlled by HP-UX after it is booted. If there is a cable, do you know the IP address of the console? This should have been&nbsp;setup when your server was installed.</P><P>For a serial connection, you probably need a null-modem cable or adapter. Most serial cables are designed to plug into modems, not servers. To request the console prompt, type ctrl-B</P> Sat, 16 Jan 2016 21:51:03 GMT https://community.hpe.com/t5/integrity-servers/server-integrity-screen-white-and-blue/m-p/6824585#M13086 Bill Hassell 2016-01-16T21:51:03Z