topic Re: ILO reboot problem in Integrity Servers

ILO reboot problem

BarryR — Thu, 12 Jul 2018 15:18:45 GMT

If the ILO configuration on a rX2800 i2 server is modified whilst the system is running,

If the ILO configuration file is modified does the physical server reboot when the configuration is committed to Bios?
If the ILO changes are committed are they effective immediately or after a system power cycle?

Hawkeye — Fri, 13 Jul 2018 08:16:50 GMT

Hi Barry,

The iLO is a separate management processor and you can change setting and reboot without impacting the running OS on the server.

To reset the iLO:-

iLO> cm

iLO> xd

iLO> r

This will disconnect you from the iLO and you will have to reconnenct once the iLO reboot has completed.

S_Logan — Mon, 01 Oct 2018 01:50:17 GMT

Hi Barry,

You can refer the support document on "HPE Integrity iLO 3 Operations Guide" for more information.