topic Re: HPE Superdome2 in Integrity Servers

HPE Superdome2

Archi1 — Tue, 13 Nov 2018 06:34:35 GMT

Hello every one

I have two superdome2 16s . now I wanna upgrade the firmware to the latest one. do you have a step by step document for it? I wanna do it by my self.

also I have 64 CPU i6 and I wanna upgrade 16s to 32. can I do it with upgrade a firmware? I checked 32s with 16s . the server in both of them are same.the different is CPU and memory that I have both of them for 32s. do you know the upgrade procedure from 16s to 32s?

Re: HPE Superdome2

Hawkeye — Tue, 13 Nov 2018 07:47:48 GMT

Hi,

It is not supported to convert 2x SD2-16S into 1x SD-32S.

Upgrade from SD2-16S to SD2-32S is achieved by purchasing the upgrade from HPE, which includes an additional enclosure and all necessary ancilliary components. HP-UX OE LTU's and associated support all need to be upgraded to 32Skt tier from the existing 16Skt tier. HPE engineers will need complete the upgrade, this is not user installable.

Superdome 2 firmware installation instructions are available on the HPESC website http://www.hpe.com/support/hpesc. I would recommend that you engage HPE to upgrade your Superdome 2 firmware.

Download of the firmware requires a current HPE Support contract to be in place for the Superdome 2.

Re: HPE Superdome2

Archi1 — Tue, 13 Nov 2018 10:45:08 GMT

thanks for reply.

I have two 16s enclusere (so, I have additional enclusere) and as I know superdome 8s,16s and 32s have same server(motherboard) the different is between CPU and Memory that I have both of them.

so,I think(I'm not sure about that) when I upgrade a firmware and install the additional encluse and set the cables I'll be able upgrade it to 32 s.

Re: HPE Superdome2

Hawkeye — Tue, 13 Nov 2018 10:57:21 GMT

Hi,

No, I'm afraid not, you will has 2x SD2-16S enclosures in an unsupported configuration.

Unfortunately, you cannot convert your 2x SD2-16S enclosures into a SD2-32S.

Re: HPE Superdome2

S_Logan — Wed, 14 Nov 2018 06:40:58 GMT

Hi Arch,

The SD2 8s and 16s have Similiar hardware (No Hardware changes), whereas 32s need 2 Enclosure.

Since , there is a hardware config changes , simple firmware upgrade wont help.

I recommend, you to please log a Hardware Support Ticket:

https://www.hpe.com/us/en/contact-hpe.html

Re: HPE Superdome2

Archi1 — Thu, 15 Nov 2018 06:06:29 GMT

I checked again

I'm sure the 8s,16s and 32s has same hardware

for upgrade from 16s to 32s you just need a tools that generate a one time password and also upgrade firmware and cabling

Re: HPE Superdome2

Hawkeye — Thu, 15 Nov 2018 07:54:40 GMT

Hi,

Superdome 8S, 16S and 32S do all use the same fundamental hardware, but as stated earlier, it is not supported to upgrade 2x 16S enclosures to form 1x SD2-32S enclosure.

Also, it is not possible for end users to upgrade the enclosure information.

If you wish to perform any upgrade, you must purchase the associated upgrade from HPE and the associated HP-UX LTU tier licenses.

HP-UX licensing is "Per-socket" (PSL) for a specific tier e.g. 8Skt/16Skt/32skt tier.

For example, to upgrade SD2-8S (with 4 blades/8skts, HP-UX11iv3 VSE-OE, 3yr FC24x7 support ) to SD2-16S you would need to purchase.

1x SD2-8S to SD2-16S upgrade

8x HP-UX11iv3 16Skt tier PSL LTU

8x 3yr FC 24x7 Support uplift for Blades and HP-UX11iv3 VSE-OE

I would strongly recommend that you mainitain your mission critical Superdome 2 server in a HPE supported configuration.

Re: HPE Superdome2

Archi1 — Sat, 17 Nov 2018 06:04:16 GMT

thanks for reply. ok I'll contact with hpe for upgrade.

I have another question.

can I install a 95XX CPU in i2 server?

in superdome2 i2 server coming with 93XX processor, i4 server with 95XX processor and i6 server coming with 97XX processor.

as you told me the server hardware are same so, can I install the 95XX processor in i2 server?

Re: HPE Superdome2

Hawkeye — Mon, 19 Nov 2018 08:55:44 GMT

Hi,

Yes, Superdome 2 supports i2, i4 and i6 cell-blades in the same enclosure, but they must be in separate nPars (hard partitions).

You cannot mix different generarionts of blades in the same nPar.

You must also ensure your Complex firmware version supports i6 cell-blades.

Your OS update level must support the generation of blade it is running on e..g. i6 requires HP-UX11iv3 2017 Update release.

Re: HPE Superdome2

Archi1 — Tue, 20 Nov 2018 06:35:58 GMT

Hi Hawkeye

Thanks a world for your reply.

yes I know SD2 supprt i2, i4 and i6

superdome2 with i2 blade server is coming with 93XX processor

superdome2 with i4 blade server is coming with 95XX processor

superdome2 with i6 blade server is coming with 97XX processor

my question is:

can I install a 95XX processor in i2 server blade?

I have 8 blade server i2 with 16 , 93XX processor in my enclosure . can I change my processor with 9560 processore?

I installed a processor and OA see the processor but when I start a prtition after 2 min the partition is going off. is it related with npartition firmware?

see the attachment file please.

Re: HPE Superdome2

S_Logan — Tue, 20 Nov 2018 07:24:23 GMT

Hi Archi,

Please refer CPU Mixing Support in SD2 Quickspecs:

CPU Mixing Support
Superdome 2 governing rules for mixing processors are as follows:
• No mixing of processor families or blade types within a nPartition
• No support for processors running at different frequencies or different cache sizes within the same nPartition enabled
• Processor modules on a blade must be the same revision, frequency, & cache size
• Mixing of processors with different frequencies and/or cache sizes will be NOT allowed within a nPartition
• Mixing of CB900s i2, CB900s i4 and CB900s i6 blades within a complex is allowed; however, mixing of
blade types within a nPartition is not supported.

More information:

HPE Integrity Superdome 2 QuickSpecs

Re: HPE Superdome2

Hawkeye — Tue, 20 Nov 2018 07:52:41 GMT

Hi,

CPU's on Superdome 2 cell-blades are not interchangeable between generations.

i2 cell-blades only support 93xx CPU's

i4 cell-blades only support 95xx CPU's

i6 cell-blades only support 97xx CPU's

Re: HPE Superdome2

Archi1 — Tue, 20 Nov 2018 10:22:42 GMT

when I installed a 95XX processor in i2 server , the system detected a new procssor.

why?

is it related to the npartition firmware?

if i2 server blade just working with 93XX , it can"t be detected a 95XX processor

Re: HPE Superdome2

Archi1 — Tue, 20 Nov 2018 10:30:17 GMT

Hi S-Logan

I don't wanna mix Processor modules and blade types in the npartition and complex

I have one SD2 16s with 8 CB900s i2 in one enclosure.

so, I wanna just change 93XX processor with 95XX in my CB900s i2.

is it possible?

if not, why systems deetected a new processor (95XX) . see the attachment photo that I sent it before.

I think (I'm not sure) it's related to the firmware . and also I think the hardware of CB900s i2, CB900s i4 and CB900s i6 blades are same.

what do you think about that?

Re: HPE Superdome2

S_Logan — Wed, 21 Nov 2018 03:17:34 GMT

Hi Archi, Please refer the "Hawkeye's" reply on Cell Blade (CB9000) Supportablity with the processors.

System may or may not detect the hardware changes., but supportablity issue may come , it may not work as expected..

Since, SD2 is the High end Server your question must be checked with Hardware Support with hardware logs and I strongly recommend you to please log a Hardware Support Ticket:

https://www.hpe.com/us/en/contact-hpe.html

Re: HPE Superdome2

Hawkeye — Fri, 15 Nov 2019 08:16:11 GMT

Hi,

It looks like you have already fitted the 9560 CPU's to your i2 blade, but this will not work and hence the nPar fails to power up.

To upgrade from i2 to i4 you need to replace the blade.