topic Re: Mirroring in Itanium in Integrity Servers

Mirroring in Itanium

KVK — Thu, 29 Dec 2005 00:28:56 GMT

What is is exact procdure to mirror the windows 2003 in Rx5670 ?

Re: Mirroring in Itanium

Joseph Loo — Thu, 29 Dec 2005 01:07:59 GMT

hi,

does it come with a RAID Smart Array Controller?

regards.

Re: Mirroring in Itanium

KVK — Thu, 29 Dec 2005 01:17:32 GMT

Is there but disk is not connected .. It's connected to internal disk slot .

Re: Mirroring in Itanium

Sivakumar TS — Thu, 29 Dec 2005 07:49:09 GMT

Dear KVK,

Please go thro the follwoing article on How to mirror the system and boot partition (RAID1) in Windows Server 2003

http://support.microsoft.com/?kbid=323432&SD=tech

With Regards,

Siva.

Re: Mirroring in Itanium

Marco Hogeveen — Fri, 30 Dec 2005 03:37:12 GMT

Please place 1 disk in one of the top 2 disk slots and it's mirror disk in one of the bottom 2 disk slots. That's because you are duplexing now: accessing the disks over 2 different controllers, so you are safe when 1 controller fails.

Install windows on 1 disk, then mirror the disk just like you would do on 32-bits windows.

Marco

Re: Mirroring in Itanium

Mohanasundaram_1 — Sun, 29 Jan 2006 00:00:13 GMT

Hi KVK,

The mirroring of the OS disk in Itanium servers is not going to be easy in Windows.

The document pointed out by Shivakumar may not work here as this is a different windows 2003 version.

The main problem may arise due to the fact that there is an EFI partition. Any mirroring solution should handle this part to succeed.

My suggestion would be to go for the RAID controller on this system and provide disk redundancy at that level.

With regards,
Mohan.

Re: Mirroring in Itanium

kris rombauts — Sun, 29 Jan 2006 10:57:40 GMT

The procedure for software mirroring (if applicable here because this thread is not updated) on Itanium 64 bit Windows 2003 is described here:

http://technet2.microsoft.com/WindowsServer/en/Library/c14382ef-f241-4c1b-ac1d-0aaf037638751033.mspx

Kris