topic Re: rx2620 with no 4 red light in Integrity Servers

rx2620 with no 4 red light

Mawuse — Wed, 04 Oct 2006 11:31:37 GMT

Hi,

I have an rx2620 server that is giving a red light at number 4.
1 and 2 are green, 3 is with no light , 4 is red .

Please help me in the diagnostics.

Regards,
Mawuse

Re: rx2620 with no 4 red light

Sameer_Nirmal — Wed, 04 Oct 2006 12:09:01 GMT

Refer the following manual for the diagnostics depending on diagnostics LED and System LED patterns.
http://docs.hp.com/en/AD117-9003A/ch05s05.html#d0e6852

You didn't mention the system LED status, but based on the manual I can see two fault status based on the diagnostics LEDs status you mentioned.

Flashing yellow
GREEN
GREEN
OFF
RED
Problem : CPU1-Fan is not functioning properly
Solution: Replace the fan that is not functioning. See the HP Integrity rx2620 Server User Service Guide for detailed instructions on the maintenance action.

Flashing red
GREEN
GREEN
OFF
RED
Problem : CPU1-Fan fault
Solution: Replace the fan that is not functioning. See the HP Integrity rx2620 Server User Service Guide for detailed instructions on the maintenance action.

Thus it seems CPU1-Fan is the cause of the problem.

Re: rx2620 with no 4 red light

Mridul Shrivastava — Thu, 05 Oct 2006 00:40:13 GMT

Since CPU fan is not an FRU so may be you have to log a call with HP and they will replace the CPU1.

The same can be confirmed from PS o/p from MP. If it is showing Fan3 at fault so it is CPU1 fan and if it is showing Fan2 at fault then it is CPU0 fan.