topic how configure one server itanium rx2600 in Integrity Servers

how configure one server itanium rx2600

Rene Mendez — Tue, 25 Feb 2003 05:57:42 GMT

I have one new server Itanium rx2600 the attach documentation no is good.

I need install HPUX 11i on this server.

Re: how configure one server itanium rx2600

Ravi_8 — Tue, 25 Feb 2003 06:25:49 GMT

Hi,
hp-ux 11i can't be installed on rx2600.
rx2600 is an Itanium server, you can install 11i ver 1.6, The OS Media comes along with the machine. Insert the CD and boot from CD,procedure is same as for RISC servers

Re: how configure one server itanium rx2600

melvyn burnard — Tue, 25 Feb 2003 08:22:32 GMT

You must make sure you are loading the Itanium version of HP-UX, and not the PA-RISC version.
For manuals, go read the manual at http://docs.hp.com/hpux/os/11iV1.6/index.html#Installing%20and%20Updating

Re: how configure one server itanium rx2600

Federico_15 — Fri, 11 Apr 2003 14:07:05 GMT

Hi,
have you buy the system with instant ignition (HP-UX 1.6 factory integrated)?
B9106AA
B9106AA AJR
B9106AA 0D1
B9106AA UMF
B9106AA ABA

If you did:
1: start the machine
2: when the system request the activation key, digit the code.