topic zx6000 has invalid UUID in Integrity Servers

zx6000 has invalid UUID

Malcolm Dunnett — Tue, 09 Jan 2007 21:41:33 GMT

I replaced a system board in a zx6000 and I now get a warning 55: Invalid system ID. The primary UUID is "magic" (all Fs) and there's a valid secondary UUID, but I'm not getting the prompt to copy the one into the other. It appears I need to be in manufacturing mode to set the UUID manually and I don't have a password for that.

Is there a way to get the system to copy the valid UUID into the invalid one?

Re: zx6000 has invalid UUID

mits — Thu, 11 Jan 2007 04:08:24 GMT

It is strange to me if no prompt appears during the boot. Have you ever replaced the system board and copied UUIDs successfully? I wonder if you have overlooked the message? If you are sure the system does not prompt for the UUID copy, I would suggest you will contact HP support center and request a CE onsite.

Re: zx6000 has invalid UUID

paul fraser_2 — Fri, 19 Jan 2007 07:14:07 GMT

If you have missed the prompt then you will have to get a CE out to perform the work.

Re: zx6000 has invalid UUID

Prashanth.D.S — Sun, 04 Feb 2007 20:14:34 GMT

Hi Malcolm,

If am not wrong you can set the UUID from MP..

Try..

MP:CM>id

This should let u change the UUID.

Best Regards,
Prashanth

Re: zx6000 has invalid UUID

mits — Sun, 04 Feb 2007 20:38:36 GMT

No, MP ID command will not change UUID.

==== MP Help: General Configuration ===========================================

ID : System Information settings

Command access level: MP Configuration access.

This command allows a user to update the following:

System Host Name: The system hostname of the OS.
SNMP Contact Person: Name, Telephone, Email, Pager number.
SNMP Server Information: Location, Rack ID, Position.

Command line usage:
ID [ { -host [ ] }
| { -person [ -name ] [ -telephone ]
[ -email ] [ -pager ] }
| { -server [ -location ] [ -rackid ]
[ -position ] ] [ -nc ]