topic rx2620 in Integrity Servers

rx2620

freddy-hq — Mon, 22 Jan 2007 13:21:37 GMT

Hi all,

I try to connect my rx2620 to null serial cable via hyper terminal. I have a connection and the boot sequence display on my hyperterminal how ever i can't use the keyboard to correspond.
Can anybody help.

Regards.

Re: rx2620

Torsten. — Mon, 22 Jan 2007 13:49:12 GMT

Hi,

you have to stop at the EFI boot menu and check the console device settings.

There is a device for input, another for output and a third for error output.

Make sure all are set to the same device.

Otherwise your output may go to the serial port, the input is expected from the USB.

Re: rx2620

freddy-hq — Mon, 22 Jan 2007 13:53:42 GMT

Thank you for corresponding,

I don't have acess to any thing else than my output display on the hyperterminal.
How do setup what you told me.

Tx

Re: rx2620

Torsten. — Mon, 22 Jan 2007 15:00:53 GMT

OK, close this thread and continue here:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1093056