https://community.hpe.com/t5/integrity-servers/p400-raid-controller-setup-on-dl380g5/m-p/4019964#M2545 <!--!*#-->Hi Guys,<BR /><BR />I am setting up a DL380G5 with 8 SAS 146gig drives, I would like to setup a mirror with 2 50gig logical partitions and the rest of the space as raid6.<BR /><BR />Now the questions is what is the difference if i only select 2 physical drives and create the array and then create the logical drives as Raid1 then select the rest of the drives and create raid6 logical. Or if i select all the drives and create the logical drives as raid1 and raid6 with the sizes required?<BR /><BR />This is confusing me as it seems that you are creating the raid on the logical level and not the physical level?<BR /><BR />Hope i am making some sense here! Thu, 14 Jun 2007 05:19:14 GMT Hugo Stroebel 2007-06-14T05:19:14Z https://community.hpe.com/t5/integrity-servers/p400-raid-controller-setup-on-dl380g5/m-p/4019964#M2545 <!--!*#-->Hi Guys,<BR /><BR />I am setting up a DL380G5 with 8 SAS 146gig drives, I would like to setup a mirror with 2 50gig logical partitions and the rest of the space as raid6.<BR /><BR />Now the questions is what is the difference if i only select 2 physical drives and create the array and then create the logical drives as Raid1 then select the rest of the drives and create raid6 logical. Or if i select all the drives and create the logical drives as raid1 and raid6 with the sizes required?<BR /><BR />This is confusing me as it seems that you are creating the raid on the logical level and not the physical level?<BR /><BR />Hope i am making some sense here! Thu, 14 Jun 2007 05:19:14 GMT https://community.hpe.com/t5/integrity-servers/p400-raid-controller-setup-on-dl380g5/m-p/4019964#M2545 Hugo Stroebel 2007-06-14T05:19:14Z