topic Re: Single user mode on ia64 in Integrity Servers

Single user mode on ia64

Barry_10 — Wed, 26 Feb 2003 20:12:15 GMT

How does one boot in single user mode on an ia64?

Thanks in advnace,
Barry

Re: Single user mode on ia64

Cameron Rooke — Thu, 27 Feb 2003 14:00:46 GMT

Basically the same way as PA-RISC systems. Interrupt the boot process (by default there is a 10 second period where you have the option to intterrupt it), and enter 'hpux -is' at the prompt. That's it.

Re: Single user mode on ia64

doug hosking — Thu, 27 Feb 2003 18:38:11 GMT

Actually, the procedure is a bit different from PA systems. Essentially, instead of
'hpux -is /stand/vmunix' you type
'boot vmunix -is' to get to single user mode.
Screen log below...

After rebooting, interrupt
the boot sequence:

Please select a boot option

HP-UX Primary Boot: 0/1/1/0.1.0
EFI Shell [Built-in]
Boot option maintenance menu
Security/Password Menu

Use ^ and v to change option(s). Use Enter to select an option
Loading.: HP-UX Primary Boot: 0/1/1/0.1.0
Starting: HP-UX Primary Boot: 0/1/1/0.1.0

(c) Copyright 1990-2002, Hewlett Packard Company.
All rights reserved

HP-UX Boot Loader for IA64 Revision 1.72

Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot - 9
Type 'help' for help

HPUX> boot vmunix -is
^^^^^^^^^^^^^^^

INIT: Overriding default level with level 's'

INIT: SINGLE USER MODE

INIT: Running /sbin/sh
#

Re: Single user mode on ia64

rkossowski — Tue, 16 Jul 2013 00:28:54 GMT

Hi All,

after you switched diff drives like fs0: or fs2: .. you have to give it full path to boot in single user mode. Below is step by step with typos to test commands ... or maybe fat fingers! ..

cheers.

Shell> mpa
'mpa' not found
Exit status code: Invalid Parameter

Shell> map
Device mapping table
fs0 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part1,SigC3072E18)
fs1 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun1,Lun0)/CDROM(Entry0)
fs2 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun2,Lun0)/HD(Part1,Sig212314FA-EAFB-11E2-8000-D6217B60E588)
fs3 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun2,Lun0)/HD(Part3,Sig212315EA-EAFB-11E2-8000-D6217B60E588)
blk0 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)
blk1 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part1,SigC3072E18)
blk2 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun1,Lun0)
blk3 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun1,Lun0)/CDROM(Entry0)
blk4 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun1,Lun0)/CDROM(Entry1)
blk5 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun2,Lun0)
blk6 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun2,Lun0)/HD(Part1,Sig212314FA-EAFB-11E2-8000-D6217B60E588)
blk7 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun2,Lun0)/HD(Part2,Sig212315E0-EAFB-11E2-8000-D6217B60E588)
blk8 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun2,Lun0)/HD(Part3,Sig212315EA-EAFB-11E2fs2:\> cls:B60E588)

fs2:\> ls
Directory of: fs2:\

07/12/13 02:00p <DIR> 4,096 EFI
07/12/13 02:00p 296 startup.nsh
1 File(s) 296 bytes
1 Dir(s)

fs2:\> cd EFO
cd: Target directory not found
Exit status code: Not Found

fs2:\> cd EFI

fs2:\EFI> cd HPUCX
cd: Target directory not found
Exit status code: Not Found

fs2:\EFI> cdHPUX
'cdHPUX' not found
Exit status code: Invalid Parameter

fs2:\EFI> clsPUX
'cdHPUX' not found
Exit status code: Invalid Parameter

fs2:\EFI> cd HPUX

fs2:\EFI\HPUX> hpux boot vmunix -is

HP-UX Boot Loader for IPF -- Revision 2.047

> System Memory = 5114 MB
loading section 0
......................................................................... (complete)
loading section 1
................. (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
.....
loading MFSFILES directory (bootfs) to MFS
.......................................
Launching /stand/vmunix
SIZE: Text:37047K + Data&colon;8432K + BSS:27167K = Total:72647K