https://community.hpe.com/t5/integrity-servers/smart-array-p400-controller-rx2660/m-p/4105131#M2992 Hello Guys.<BR /><BR />I am trying to create a RAID1 in the rx2660 hp-ux 11.23 but i can not archive it, i was reading the documentation and the server does not have the <BR />Smart Array P400 Serial Attached SCSI (SAS) controller, so i think that's my problem but i am not sure about it, does it possible to create the array without these controller ? <BR /><BR />Thank for you advice and help Mon, 19 Nov 2007 16:24:37 GMT FOBF 2007-11-19T16:24:37Z https://community.hpe.com/t5/integrity-servers/smart-array-p400-controller-rx2660/m-p/4105131#M2992 Hello Guys.<BR /><BR />I am trying to create a RAID1 in the rx2660 hp-ux 11.23 but i can not archive it, i was reading the documentation and the server does not have the <BR />Smart Array P400 Serial Attached SCSI (SAS) controller, so i think that's my problem but i am not sure about it, does it possible to create the array without these controller ? <BR /><BR />Thank for you advice and help Mon, 19 Nov 2007 16:24:37 GMT https://community.hpe.com/t5/integrity-servers/smart-array-p400-controller-rx2660/m-p/4105131#M2992 FOBF 2007-11-19T16:24:37Z https://community.hpe.com/t5/integrity-servers/smart-array-p400-controller-rx2660/m-p/4105132#M2993 If the server doesn't have the SA-P400 controller, then it should have HP 8 Internal Port SAS Controller.<BR /><BR />In this case, you need to refer it's user guide available at <A href="http://docs.hp.com/en/J6369-90045/J6369-90045.pdf" target="_blank">http://docs.hp.com/en/J6369-90045/J6369-90045.pdf</A> <BR />to create IM (RAID 1)volume. Mon, 19 Nov 2007 17:46:49 GMT https://community.hpe.com/t5/integrity-servers/smart-array-p400-controller-rx2660/m-p/4105132#M2993 Sameer_Nirmal 2007-11-19T17:46:49Z