topic Re: smart array configuration utility on rx6660 in Integrity Servers

smart array configuration utility on rx6660

Nyck_1 — Wed, 12 Mar 2008 14:17:03 GMT

I have just taken delivery of a rx6660 which has got 16 146GB internal disks and during the OS install process it mentions about running the smart array configuration utility, how do i go about running this?

Re: smart array configuration utility on rx6660

Steven E. Protter — Wed, 12 Mar 2008 14:22:20 GMT

Shalom,

F8 I believe during boot.

The system has a svga port. Hook up a monitor and keyboard for initial setup.

There will be a prompt for smart array configuration at boot.

SEO

Re: smart array configuration utility on rx6660

Torsten. — Wed, 12 Mar 2008 14:24:31 GMT

If you have the VGA console connected, you can use the F8 key.

If you are working on a serial terminal, use ESC 8.

Re: smart array configuration utility on rx6660

Tim Nelson — Wed, 12 Mar 2008 14:32:20 GMT

drvcfg from the EFI boot shell

see attached.

You could also go to docs.hp.com for SAS controller manual.

Re: smart array configuration utility on rx6660

Torsten. — Wed, 18 Sep 2024 15:32:22 GMT

The document Tim attached applies to the integrated SAS controller.
The complete manual is here:
~~http://docs.hp.com/en/J6369-90070/index.html~~

But if you have the P400 smartarray instead, have a look at this:

~~http://docs.hp.com/en/J6369-90065/index.html~~

About the offline config tool (orca):
~~http://docs.hp.com/en/J6369-90065/ch03s03.html~~

[Moderator edit: The above links are no longer valid. You may refer to https://support.hpe.com/]

Re: smart array configuration utility on rx6660

Nyck_1 — Thu, 20 Mar 2008 07:57:19 GMT

Thankyou for all the excellent responses!

With luck I will get the chance to try this today, will let you know on progress

Re: smart array configuration utility on rx6660

Nyck_1 — Fri, 28 Mar 2008 06:45:49 GMT

I have finally got round to looking at this and esc 8 is the route from the boot level to set up the logical devices. I also believe that i can use saconfig to do the same task once the server has been built. So is it best to create the logical devices from the boot level ( orca ) or use saconfig?

Re: smart array configuration utility on rx6660

YAQUB_1 — Fri, 28 Mar 2008 07:50:56 GMT

boot level.

Re: smart array configuration utility on rx6660

Nyck_1 — Fri, 28 Mar 2008 07:58:18 GMT

Out of interest is there any particular reason for configuring at boot level?

I have been playing with saconfig and its pretty simple

Re: smart array configuration utility on rx6660

Andrew Rutter — Fri, 28 Mar 2008 13:58:56 GMT

hi,

saconfig has alot more options for you to configure the array excactly as you want it, so that is my prefered method.

However if you want to install your OS onto the raid set then this is where it comes in handy been able to configure at boot

Andy

Re: smart array configuration utility on rx6660

Nyck_1 — Fri, 28 Mar 2008 14:01:59 GMT

Yeah I was doing some more reading up on this and I'm not really bothered about having the root disk mirrored. So I will install the OS as normal and then use saconfig to create the logical drives. If i change my mind in the future about mirroring root I can always use MirrorUX.