https://community.hpe.com/t5/integrity-servers/rx2620-primary-boot-path/m-p/4165817#M3465 Hello,<BR /><BR />You cannot set a boot path to a path that do not exists.<BR /><BR />So you should stop the server put your disk from slot 2 to slot 0. Then start stop at EFI go to fs0: or fs1: (which disk is your boot one) and find the hpux.efi file. start it and when your OS boots then execute setboot and it will make the correct entry in EFI.<BR /><BR />BR<BR /><BR />George Sun, 23 Mar 2008 09:24:50 GMT George Genov 2008-03-23T09:24:50Z https://community.hpe.com/t5/integrity-servers/rx2620-primary-boot-path/m-p/4165816#M3464 Hello Gurus,<BR />I have my rx2620 with 2 disks in slot 1 and 2.<BR />when i run setboot in hp-ux, i see the below:<BR /><BR />Primary bootpath : 0/1/1/1.2.0<BR />HA Alternate bootpath : 0/1/2/0<BR />Alternate bootpath : 0/1/2/1<BR /><BR />Autoboot is ON (enabled)<BR /><BR />The disk in slot 2 is having the OS. I want to bring it to slot 0 and boot OS from there.<BR /><BR />How do I do that?<BR />I have tried setboot -p 0/1/1/0.0.0 but i get the error setboot: cannot set primary boot path.<BR /><BR />Please assist.<BR /><BR />Horace Fri, 21 Mar 2008 13:41:04 GMT https://community.hpe.com/t5/integrity-servers/rx2620-primary-boot-path/m-p/4165816#M3464 H S Z 2008-03-21T13:41:04Z https://community.hpe.com/t5/integrity-servers/rx2620-primary-boot-path/m-p/4165817#M3465 Hello,<BR /><BR />You cannot set a boot path to a path that do not exists.<BR /><BR />So you should stop the server put your disk from slot 2 to slot 0. Then start stop at EFI go to fs0: or fs1: (which disk is your boot one) and find the hpux.efi file. start it and when your OS boots then execute setboot and it will make the correct entry in EFI.<BR /><BR />BR<BR /><BR />George Sun, 23 Mar 2008 09:24:50 GMT https://community.hpe.com/t5/integrity-servers/rx2620-primary-boot-path/m-p/4165817#M3465 George Genov 2008-03-23T09:24:50Z