topic Re: creating npars on itanimum server in Integrity Servers

creating npars on itanimum server

pedliz12 — Wed, 25 Jun 2008 21:03:43 GMT

received a new I64 bow with one npar
created another npar1 and added two cells to it.
tried to set the boot by parmodify -p1 -b 1.0.0.2.0.6.0 it will not let me

how to you boot the new npar via EFI?

Re: creating npars on itanimum server

Sandy Chen — Thu, 26 Jun 2008 07:13:10 GMT

Hi,

you can boot the new npar via MP, btw what server are u using?

Regards,
Sandy

Re: creating npars on itanimum server

pedliz12 — Thu, 26 Jun 2008 12:49:39 GMT

how do you boot it once it comes into the
>shell prompt

Re: creating npars on itanimum server

Sherif A. Louis — Thu, 26 Jun 2008 17:27:20 GMT

what u are trying to do is to set a boot disk to boot partition 1

login to the MP type in co for console access then u'll get a screen prompting u to choose between partition 0 and partition 1 pick partition 1 and it should boot.

i'm not sure about that syntax u made for the bootdisk.. are u sure this is the disk or dvd u want to boot from?