topic Change CPU between partitions - SD Itanium in Integrity Servers

Change CPU between partitions - SD Itanium

Rodrigo Albernaz — Mon, 03 Nov 2008 17:27:15 GMT

I have a SD Itanium with 4 partitions.
Partition 1 - 2 CPU
Partition 2 - 10 CPU
Partition 3 - 2 CPU
Partition 4 - 2 CPU

I need change CPU the partition 4 to partition 2, for example:

This will:
Partition 2 - 11 CPU
Partition 4 - 1 CPU

How could i run (execute) this change? This Machine don't work with VPAR.

Re: Change CPU between partitions - SD Itanium

Torsten. — Mon, 03 Nov 2008 19:34:21 GMT

You can only assign a whole cell with all memory, cpu and I/O to a partition (without virtualization, e.g. vPars).

So check if you can change the cell assignments. Otherwise you can swap cpu modules from cell to cell ...

Re: Change CPU between partitions - SD Itanium

Rodrigo Albernaz — Tue, 04 Nov 2008 09:30:42 GMT

Thanks!
Then only physical change. I thought be possible for commands. for example: vparmodify. I thought the parmodify could work similar to vparmodify, getting I/O to a partition and add them in another, but as it is not possible.
Very grateful.