topic Re: Flashing RED System Health LED in Integrity Servers

Flashing RED System Health LED

maxell_1 — Tue, 06 Jan 2009 02:54:48 GMT

I have few rx2660 servers.

Does anyone know why my server's system
health LED keep on flashing RED whenever the server is switched off and on again. The server
will only boot to EFI.

Thanks

Re: Flashing RED System Health LED

Jeeshan — Tue, 06 Jan 2009 04:23:46 GMT

is it RED or AMBER(orange) flashing?

if it's RED then check the MP logs for details.

Re: Flashing RED System Health LED

SKR_1 — Tue, 06 Jan 2009 04:38:19 GMT

If it is Red then there should be some hardware failure, check MP logs and system events logs.

Thanks

SKR

Re: Flashing RED System Health LED

maxell_1 — Tue, 06 Jan 2009 08:29:24 GMT

Is it always that RED means hardware failure or there can be other sources of failure?

Re: Flashing RED System Health LED

cnb — Tue, 06 Jan 2009 08:53:19 GMT

Hi,

This may help for full explanation of LEDs:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01163996/c01163996.pdf

See Chapter 5.

HTH,

Re: Flashing RED System Health LED

yulianto piyut — Tue, 06 Jan 2009 12:26:10 GMT

check the error log at MP first, maybe is hardware failure if flashing RED is on.

Re: Flashing RED System Health LED

sujit kumar singh — Wed, 07 Jan 2009 12:28:54 GMT

this is a Hardwareissue and the MP system logs need to be analysed fpr pin pointing the problem, Can be System Board CPUs etc.

Need to send the MP logs to Hardware guy having the tools to analyze the MP logs.

Regards
Sujit

Sujit