topic Re: RAID Ccnfiguration in Integrity Servers

RAID Ccnfiguration

Dennis_45 — Thu, 26 Mar 2009 01:05:53 GMT

What are the command to verify if the server is configure as RAID1 and RAID5?

"ia64 hp server rx6600"

Re: RAID Ccnfiguration

Torsten. — Thu, 26 Mar 2009 03:50:41 GMT

Hi Dennis,

a RAID5 is only possible if you have a P400 smartarray controller. Check with

# saconfig /dev/ciss_

(use the ciss device from ioscan)

Re: RAID Ccnfiguration

Sherif A. Louis — Fri, 27 Mar 2009 15:22:26 GMT

sasmgr get_info -D /dev/sasd0 -q raid

you'll find more help on this forum:

http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1238170731700+28353475&threadId=1294611

Re: RAID Ccnfiguration

Sherif A. Louis — Fri, 27 Mar 2009 15:33:35 GMT

you can also start the drvcfg utility from EFI

efi> drvcfg -s

Re: RAID Ccnfiguration

Taifur — Sat, 28 Mar 2009 04:30:28 GMT

Hi Dennis,

The following command will display all RAID volume information
for the controller with the device file dev/sasd0

#sasmgr get_info -D /dev/sasd0 -q raid

For more details you can follow below link,

http://docs.hp.com/en/J6369-90045/ch04s02.html

Rgds/
Taifur