Problem with EFI, need help!

cheesytime — Tue, 09 Jun 2009 02:42:27 GMT

I do not have the command conconfig on my EFI shell, see below:

Loading.: EFI Shell [Built-in]
EFI Shell version 1.10 [14.62]onsole - - - - - - - - - - - -
Device mapping table
fs0 : Acpi(PNP0A03,0)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,SigAE99B438-5496-11DE-8002-D6217B60E588)
fs1 : Acpi(PNP0A03,0)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part3,SigAE99B47E-5496-11DE-8004-D6217B60E588)
blk0 : Acpi(PNP0A03,0)/Pci(1|0)/Scsi(Pun0,Lun0)
blk1 : Acpi(PNP0A03,0)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,SigAE99B438-5496-11DE-8002-D6217B60E588)
blk2 : Acpi(PNP0A03,0)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part2,SigAE99B460-5496-11DE-8003-D6217B60E588)
blk3 : Acpi(PNP0A03,0)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part3,SigAE99B47E-5496-11DE-8004-D6217B60E588)
startup.nsh> echo -off

setting hpux path(\EFI\HPUX)...
type 'fs[x]:' where x is your bootdisk (0, 1, 2...)
type 'hpux' to start hpux bootloader

'conconfig' not found
Exit status code: Invalid Parameter

How do I set the console to VGA?

I ask this question because of this:

Total MFS memory required is 5005976
Checking "my-fPar": warning, GetVariable status: Not Found 0

>> my-fPar is 0xFF, adding 0x40AF000 to kdata_size
> System Memory = 2042 MB
Total memory = 0x7FA8E000 bytes, minimum image = 0x51B83A8
>> FINAL DATA IMAGE SIZE is 0x8000000
tg_get_text_mem: size = 0x1CCECC0 base align = 0x4000000
i = 1 and text pbase = 4000000
tg_get_text_mem succeeded
tg_get_data_mem: size = 0x8000000 base align = 0x4000000
: size/base = 2
size is 0x8000000 and LastAvailMemory is at 0x7FFBBFFF
i = 2 and data pbase = 8000000, size = 8000000 (2 TRs)
tg_get_data_mem succeeded
pbase_text is 0x4000000 pbase_data is 0x8000000
loading section 0
.......................................................... (complete)
loading section 1
............... (complete)
Entry point: 0xE0000000008C1090
Parameter area: vaddr=0xE000000100C413C0 paddr=0x8C413C0
loading symbol table
loading System Directory (boot.sys) to MFS
tg_mfs_load_rec(): boot.sys
Opened dir for MFS: 3 = boot.sys
lfs_open: path to open : "/stand/boot.sys/stand"
Opening : boot.sys/stand
Created MFS dir: /stand
Closing fd before recursion: 4
tg_mfs_load_rec(): boot.sys/stand
Opened dir for MFS: 4 = boot.sys/stand
lfs_open: path to open : "/stand/boot.sys/stand/ioconfig"
Opening : boot.sys/stand/ioconfig
.Loaded file into MFS: /stand/ioconfig
lfs_open: path to open : "/stand/boot.sys/stand/krs"
Opening : boot.sys/stand/krs
Created MFS dir: /stand/krs
Closing fd before recursion: 5
tg_mfs_load_rec(): boot.sys/stand/krs
Opened dir for MFS: 5 = boot.sys/stand/krs
lfs_open: path to open : "/stand/boot.sys/stand/krs/system.krs"
Opening : boot.sys/stand/krs/system.krs
.Loaded file into MFS: /stand/krs/system.krs
lfs_open: path to open : "/stand/boot.sys/stand/krs/system.krs.lkg"
Opening : boot.sys/stand/krs/system.krs.lkg
.Loaded file into MFS: /stand/krs/system.krs.lkg
Closed dir for MFS: 5
lfs_open: path to open : "/stand/boot.sys/stand/rootconf"
Opening : boot.sys/stand/rootconf
.Loaded file into MFS: /stand/rootconf
Closed dir for MFS: 4
Closed dir for MFS: 3

loading MFSFILES directory (bootfs) to MFS
tg_mfs_load_rec(): bootfs
Opened dir for MFS: 3 = bootfs
lfs_open: path to open : "/stand/bootfs/stand"
Opening : bootfs/stand
Closing fd before recursion: 4
tg_mfs_load_rec(): bootfs/stand
Opened dir for MFS: 4 = bootfs/stand
lfs_open: path to open : "/stand/bootfs/stand/current"
Opening : bootfs/stand/current
Created MFS dir: /stand/current
Closing fd before recursion: 5
tg_mfs_load_rec(): bootfs/stand/current
Opened dir for MFS: 5 = bootfs/stand/current
lfs_open: path to open : "/stand/bootfs/stand/current/krs"
Opening : bootfs/stand/current/krs
Created MFS dir: /stand/current/krs
Closing fd before recursion: 6
tg_mfs_load_rec(): bootfs/stand/current/krs
Opened dir for MFS: 6 = bootfs/stand/current/krs
lfs_open: path to open : "/stand/bootfs/stand/current/krs/config.krs"
Opening : bootfs/stand/current/krs/config.krs
.Loaded file into MFS: /stand/current/krs/config.krs
lfs_open: path to open : "/stand/bootfs/stand/current/krs/config.krs.lkg"
x ** Could not open file for MFS: bootfs/stand/current/krs/config.krs.lkg
Closed dir for MFS: 6
lfs_open: path to open : "/stand/bootfs/stand/current/mod"
Opening : bootfs/stand/current/mod
Created MFS dir: /stand/current/mod
Closing fd before recursion: 6
tg_mfs_load_rec(): bootfs/stand/current/mod
Opened dir for MFS: 6 = bootfs/stand/current/mod
lfs_open: path to open : "/stand/bootfs/stand/current/mod/dmpaa"
Opening : bootfs/stand/current/mod/dmpaa
.Loaded file into MFS: /stand/current/mod/dmpaa
lfs_open: path to open : "/stand/bootfs/stand/current/mod/dmpap"
Opening : bootfs/stand/current/mod/dmpap
.Loaded file into MFS: /stand/current/mod/dmpap
lfs_open: path to open : "/stand/bootfs/stand/current/mod/dmphdsalua"
Opening : bootfs/stand/current/mod/dmphdsalua
.Loaded file into MFS: /stand/current/mod/dmphdsalua
lfs_open: path to open : "/stand/bootfs/stand/current/mod/ipf"
Opening : bootfs/stand/current/mod/ipf
.Loaded file into MFS: /stand/current/mod/ipf
lfs_open: path to open : "/stand/bootfs/stand/current/mod/rng"
Opening : bootfs/stand/current/mod/rng
.Loaded file into MFS: /stand/current/mod/rng
lfs_open: path to open : "/stand/bootfs/stand/current/mod/gvid_him_cons"
Opening : bootfs/stand/current/mod/gvid_him_cons
.Loaded file into MFS: /stand/current/mod/gvid_him_cons
lfs_open: path to open : "/stand/bootfs/stand/current/mod/dmpaaa"
Opening : bootfs/stand/current/mod/dmpaaa
.Loaded file into MFS: /stand/current/mod/dmpaaa
lfs_open: path to open : "/stand/bootfs/stand/current/mod/drmfglrx"
Opening : bootfs/stand/current/mod/drmfglrx
.Loaded file into MFS: /stand/current/mod/drmfglrx
lfs_open: path to open : "/stand/bootfs/stand/current/mod/dmpapf"
Opening : bootfs/stand/current/mod/dmpapf
.Loaded file into MFS: /stand/current/mod/dmpapf
lfs_open: path to open : "/stand/bootfs/stand/current/mod/dmpapg"
Opening : bootfs/stand/current/mod/dmpapg
.Loaded file into MFS: /stand/current/mod/dmpapg
lfs_open: path to open : "/stand/bootfs/stand/current/mod/drmfgl"
Opening : bootfs/stand/current/mod/drmfgl
.Loaded file into MFS: /stand/current/mod/drmfgl
lfs_open: path to open : "/stand/bootfs/stand/current/mod/cdfs"
Opening : bootfs/stand/current/mod/cdfs
.Loaded file into MFS: /stand/current/mod/cdfs
lfs_open: path to open : "/stand/bootfs/stand/current/mod/cifs"
Opening : bootfs/stand/current/mod/cifs
.Loaded file into MFS: /stand/current/mod/cifs
lfs_open: path to open : "/stand/bootfs/stand/current/mod/pfil"
Opening : bootfs/stand/current/mod/pfil
.Loaded file into MFS: /stand/current/mod/pfil
lfs_open: path to open : "/stand/bootfs/stand/current/mod/gvid_info"
Opening : bootfs/stand/current/mod/gvid_info
.Loaded file into MFS: /stand/current/mod/gvid_info
lfs_open: path to open : "/stand/bootfs/stand/current/mod/dmphpalua"
Opening : bootfs/stand/current/mod/dmphpalua
.Loaded file into MFS: /stand/current/mod/dmphpalua
lfs_open: path to open : "/stand/bootfs/stand/current/mod/gvid_him_fgl"
Opening : bootfs/stand/current/mod/gvid_him_fgl
.Loaded file into MFS: /stand/current/mod/gvid_him_fgl
lfs_open: path to open : "/stand/bootfs/stand/current/mod/dmpjbod"
Opening : bootfs/stand/current/mod/dmpjbod
.Loaded file into MFS: /stand/current/mod/dmpjbod
Closed dir for MFS: 6
Closed dir for MFS: 5
Closed dir for MFS: 4
Closed dir for MFS: 3

>>> tg_mfs_size is 0x004C8000 bytes.
P=4000000 V=E000000000000000 (type 1)
iab_mov_to_rr(0xE000000000000000 0xDEAD31)
Pin text: P=04000000 V=E000000000000000 size=65536K
insert itr[1] tpa = 10000004000261 itir = BEEF68 tva = E000000000000000
insert dtr[0] tpa = 10000004000461 itir = BEEF68 ps = 1A tva = E000000000000000
P=8000000 V=E000000100000000 (type 3)
iab_mov_to_rr(0xE000000100000000 0xDEAD31)
Pin data: P=08000000 V=E000000100000000 size=65536K
insert dtr[1] tpa = 10000008000461 itir = BEEF68 ps = 1A tva = E000000100000000
insert itr[2] tpa = 10000008000261 itir = BEEF68 tva = E000000100000000
Pin data: P=0C000000 V=E000000104000000 size=65536K
insert dtr[2] tpa = 1000000C000461 itir = BEEF68 ps = 1A tva = E000000104000000
insert itr[3] tpa = 1000000C000261 itir = BEEF68 tva = E000000104000000
Initializing Boot Environment Pointer Table
Warning: couldn't get console out device path. - (status:Not Found) 0

Printing EFI Boot PATH in pretty format.
=> Acpi(PNP0A03,0)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part2,SigAE99B460-5496-11DE-8003 -D6217B60E588)
Printing EFI ConIn PATH in pretty format.
=> Acpi(PNP0A03,0)/Pci(3|0)/Acpi(PNP0501,0)/Uart(115200 N81)/VenMsg(Vt100)
Launching /stand/vmunix
SIZE: Text:29499K + Data:7288K + BSS:5260K = Total:42048K
Console is on Serial COM1
Booting kernel...

Warning: couldn't get console out device path. - (status:Not Found) 0

See?

Re: Problem with EFI, need help!

Torsten. — Tue, 09 Jun 2009 03:37:15 GMT

Some older servers doesn't have this command, so exit from EFI and use the configuration menu.

Re: Problem with EFI, need help!

cheesytime — Tue, 09 Jun 2009 11:03:27 GMT

I do not see any VGA entry in the options menu under the Active Output Devices, the only one I can mark is the vt100 one.

Re: Problem with EFI, need help!

Torsten. — Tue, 09 Jun 2009 12:37:19 GMT

What server model is it?

Re: Problem with EFI, need help!

cheesytime — Tue, 09 Jun 2009 14:53:53 GMT

its a rx2660

Re: Problem with EFI, need help!

Torsten. — Tue, 09 Jun 2009 14:58:25 GMT

Please post

EFI> info all

Re: Problem with EFI, need help!

cheesytime — Tue, 09 Jun 2009 15:08:23 GMT

Shell> info all
'info' not found
Exit status code: Invalid Parameter

Shell> ver
EFI Specification Revision : 1.10
EFI Vendor : HP
EFI Revision : 14.62

SAL Specification Revision 3. 0
SAL_A Revision = 1. 5
SAL_B Revision = 1. 5

PAL_A Revision 7.31
PAL_B Revision 7.59

Other modules mentioned in FIT (Firmware Interface Table)
FIT_Entry Type 0, Revision 1.10

SalProc Entry 00000000FFF00000 and GP 00000000FFF17000
PalProc Entry 00000000FFF04000 IO Port Base 00000FFFFC000000
Cache Enabled

Shell>

Re: Problem with EFI, need help!

Torsten. — Tue, 09 Jun 2009 16:47:51 GMT

This is a bit strange, could you please connect to the MP and run "sysrev"?

Re: Problem with EFI, need help!

cheesytime — Tue, 09 Jun 2009 16:56:29 GMT

[test] vMP> sysrev

Error: Command 'SYSREV' is not implemented by hpvmconsole.

Re: Problem with EFI, need help!

Torsten. — Tue, 09 Jun 2009 17:06:54 GMT

You did NOT say this is a virtual machine!

Re: Problem with EFI, need help!

cheesytime — Tue, 09 Jun 2009 17:13:12 GMT

Yeah, now bare with me!

Re: Problem with EFI, need help!

sujit kumar singh — Wed, 10 Jun 2009 11:08:22 GMT

Hi

The installation of Ignite make_net_recovery images has challenges when being done on a different hardware platform.

Also the Ignite Golden Image has fairly better chances as compared to the make_net_recovery images being restored to a machine being ignited.
suggested creating a golden image and try restoring that to the IVM Guest.

i have found instances(though only very few!)the same golden image needed to be reinstalled to get a good running OS.

Regards
sujit

topic Re: Problem with EFI, need help! in Integrity Servers

Problem with EFI, need help!

Re: Problem with EFI, need help!

Re: Problem with EFI, need help!

Re: Problem with EFI, need help!

Re: Problem with EFI, need help!

Re: Problem with EFI, need help!

Re: Problem with EFI, need help!

Re: Problem with EFI, need help!

Re: Problem with EFI, need help!

Re: Problem with EFI, need help!

Re: Problem with EFI, need help!

Re: Problem with EFI, need help!