topic Re: integrity rx2660 single processor in Integrity Servers

integrity rx2660 single processor

proconsul — Tue, 08 Sep 2009 15:30:56 GMT

I have an integrity rx2660 that will not boot,i got a cru error system health blinking orange/power-steady orange and found the p400 controller battery was bad,i replaced the batt and now no errors but it just goes to a black screen with a flashing curser in the upper left hand corner and is not responding????any help would be greatly appreciated

Re: integrity rx2660 single processor

TTr — Tue, 08 Sep 2009 16:11:47 GMT

Check the status lights on page 135 of the user service guide

http://docs.hp.com/en/AB419-9002C-ed5/AB419-9002C-ed5.pdf

Does anything at all come on the screen before it goes on the blank screen? Are you sure the console is connected properly?

Re: integrity rx2660 single processor

Torsten. — Tue, 08 Sep 2009 16:54:57 GMT

Do you see anything while starting?

If, go to EFI shell and run

Shell> conconfig

to check your console configuration.