https://community.hpe.com/t5/integrity-servers/rx6600-mp-light-not-on/m-p/4496642#M5550 The MP port (labeled as "MP LAN") has 2 LEDs - upper is yellow (10/100 mode), lower is green = link).<BR /><BR />So you don't have the green light?<BR /><BR />What does<BR /><BR />MP:CM&gt; ls<BR /><BR />tell you? Mon, 14 Sep 2009 12:58:55 GMT Torsten. 2009-09-14T12:58:55Z https://community.hpe.com/t5/integrity-servers/rx6600-mp-light-not-on/m-p/4496641#M5549 I have tried everything for MY mp lan but unable to see the any connection light on MP port.<BR />With my laptop its working fine and light will blink but on network it wont even show any connection light.<BR />i have check tht cable with my laptop with same ip and gateway,its working fine with my laptop and light keep blinking.<BR /><BR />i have change the speed to auto negoitiate and also tested the 10baseT but still not able to see any light on MP port on network with switch.<BR /><BR />i have connected other switch cable with this server but still not able to see connection light on this server.<BR /><BR />Someone with exprience????? Mon, 14 Sep 2009 03:30:47 GMT https://community.hpe.com/t5/integrity-servers/rx6600-mp-light-not-on/m-p/4496641#M5549 shabash 2009-09-14T03:30:47Z https://community.hpe.com/t5/integrity-servers/rx6600-mp-light-not-on/m-p/4496642#M5550 The MP port (labeled as "MP LAN") has 2 LEDs - upper is yellow (10/100 mode), lower is green = link).<BR /><BR />So you don't have the green light?<BR /><BR />What does<BR /><BR />MP:CM&gt; ls<BR /><BR />tell you? Mon, 14 Sep 2009 12:58:55 GMT https://community.hpe.com/t5/integrity-servers/rx6600-mp-light-not-on/m-p/4496642#M5550 Torsten. 2009-09-14T12:58:55Z