topic itanum booting !! in Integrity Servers

itanum booting !!

gany59 — Mon, 02 Nov 2009 20:47:05 GMT

Hi to all..

Could any body tell the booting procedure steps of itanium servers.

Re: itanum booting !!

Michael Steele_2 — Mon, 02 Nov 2009 21:33:25 GMT

Hi

Stand alone, npar, vpar, virtual?

Firmware
EFI (* where MBR resides *)
hpux.efi (* c0t0d0s1 *)
vmunix (* c0t0d0s2 *)

...were vmunix is the kernel found under /stand/vmunix.

The boot disk looks like the following:

MBR - Master Boot Record - c0t0d0
EFI Partition Table - c0t0d0 - points to the System Partition EFI table, c0t0d0s1, The start of the O/S c0t0d0s2, and the HSPS or Diags / Service Partition, c0t0d0s3.
Finally there is a backup of the EFI Partition table also found in c0t0d0.

Re: itanum booting !!

Torsten. — Mon, 02 Nov 2009 21:58:25 GMT

see

http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1087794

Re: itanum booting !!

The Brit — Tue, 03 Nov 2009 11:57:55 GMT

That is a very big question. Would you like to narrow it down a bit? For example, what OS are you trying to boot?

Dave.