topic Re: Help required -Urgent in Integrity Servers

Help required -Urgent

Trng — Tue, 12 Jan 2010 04:32:11 GMT

Dear All,

Customer has changed rx4640 console setting through EFI .Now no display coming on console connected to VGA Port.i am able to telnet from remote machine.How to reset the console setting in EFI ?

regards

Re: Help required -Urgent

sujit kumar singh — Tue, 12 Jan 2010 04:36:22 GMT

hi

revert back the settings on the rx4640 to serial console.

perhpas you shall need to access the EFi shell for doing this.

regards
sujit

Re: Help required -Urgent

Torsten. — Tue, 12 Jan 2010 06:14:54 GMT

At EFI level you can use all connections as a console.

So go to EFI and use "conconfig".

Note: If console set to VGA, you cannot use the MP to get the hp-ux console from remote!

Re: Help required -Urgent

Steven Schweda — Tue, 12 Jan 2010 10:43:19 GMT

> Subject: Help required -Urgent

A Subject which contains a short description
of the subject often works better than one
which says nothing useful.