topic Re: upgrade processor rx2660 in Integrity Servers

upgrade processor rx2660

Mark65 — Tue, 02 Feb 2010 11:56:19 GMT

Hi, I've added a processor into my rx2660 but it returns a message: Sched Reconf.
I've tried to reconfigure the cpu but without results.
May be I have to update the firmware. But which ?

Thank you

Re: upgrade processor rx2660

Torsten. — Tue, 02 Feb 2010 14:27:43 GMT

What CPU type was installed? What type did you install? Where did you get this message? What else did you try? What OS is running?

CPU must be the same type.

Re: upgrade processor rx2660

Mark65 — Tue, 02 Feb 2010 14:57:32 GMT

My OS is HPUXi v2, The CPU is the same that there already is installed. The message appears when I turn on the server as a warning error and also if I enter into the EFI console manager and type the cpuconfig command.

Re: upgrade processor rx2660

Michal Kapalka (mikap) — Tue, 02 Feb 2010 14:59:27 GMT

hi,

check this thread :

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1163688

mikap

Re: upgrade processor rx2660

Torsten. — Tue, 02 Feb 2010 15:22:51 GMT

Please show us

Shell> cpuconfig

Shell> info all

Re: upgrade processor rx2660

mits — Wed, 03 Feb 2010 05:58:49 GMT

The message "Sched Reconf" means the system will reconfigure the CPU core on next boot. Did you try to reboot the system? If it does not help, I suggest you will check MP DF -all output to see if you installed identical new processor module with other CPU mdules. MP FPL may show you some more details about the problem. Can you upload DF output and MP SEL output for reference? Also MP SR output is required to see if your system canm support your new CPU module.