topic Re: MP Login in Integrity Servers

MP Login

kunjuttan — Mon, 10 May 2010 05:08:34 GMT

Hi
How can I able to do MP login?My server is ia64 hp server rx3600.

Re: MP Login

Dennis Handly — Mon, 10 May 2010 05:31:45 GMT

On the console just type control-B.
Otherwise do you have the MP on a LAN connection?

Re: MP Login

Hakki Aydin Ucar — Mon, 10 May 2010 05:42:33 GMT

Hi,

You probably should have an IP for remote connection as Denis stated. and you just try to telnet to MP, by default userid / password must be Admin/Admin.

Re: MP Login

kunjuttan — Mon, 10 May 2010 06:38:21 GMT

thanx..Can you please give me the detailed steps

Re: MP Login

Anshumali — Mon, 10 May 2010 07:00:06 GMT

This should help:

http://docs.hp.com/en/AB463-9003C-ed6/ch03s07.html

Cheers!
Anshu

Re: MP Login

Jeeshan — Mon, 10 May 2010 07:05:58 GMT

As stated above, connect through telnet if IP configured or connect through serial port using hyper terminal.

Then use default user/password as Admin/Admin and in MP console type he (for help) to see the list of available command and its usages.

Re: MP Login

R.O. — Mon, 10 May 2010 07:06:55 GMT

Hi,

# telnet
# insert user/passwd (usually admin/admin)

Now you are logged into the console.

Regards,

Re: MP Login

S.N.S — Mon, 10 May 2010 10:55:31 GMT

But remember, Telnet is not secure...
Check out the security options
MP>CM>SO

You would be able to disable Telnet from there.

HTH
SNS

Re: MP Login

Suraj K Sankari — Mon, 10 May 2010 13:26:17 GMT

Hi,

>>How can I able to do MP login?My server is ia64 hp server rx3600.

Here is the link where you can find how to use MP or GSP ..
http://docs.hp.com/en/B2355-90702/ch02s07.html

Suraj

Re: MP Login

Benoy Daniel — Mon, 10 May 2010 23:35:12 GMT

Initially you need to set the MP IP using local console. You may not able to get into through your local network using factory default.