https://community.hpe.com/t5/integrity-servers/second-embedded-nic-takes-down-system/m-p/4631813#M6422 Hello,<BR />I have a Rx2620 with two embedded nics<BR />One nic is in use and the other, was prepared this morning (IP, Netmask, Gateway). BUT without connecting the lan cable to it. After inputting all items it seemed to have brought down the whole box, as far as communications. Has anyone had this problem before and can tell me why my communication was brought down on this box? Tue, 11 May 2010 14:32:40 GMT ROSS HANSON 2010-05-11T14:32:40Z https://community.hpe.com/t5/integrity-servers/second-embedded-nic-takes-down-system/m-p/4631813#M6422 Hello,<BR />I have a Rx2620 with two embedded nics<BR />One nic is in use and the other, was prepared this morning (IP, Netmask, Gateway). BUT without connecting the lan cable to it. After inputting all items it seemed to have brought down the whole box, as far as communications. Has anyone had this problem before and can tell me why my communication was brought down on this box? Tue, 11 May 2010 14:32:40 GMT https://community.hpe.com/t5/integrity-servers/second-embedded-nic-takes-down-system/m-p/4631813#M6422 ROSS HANSON 2010-05-11T14:32:40Z https://community.hpe.com/t5/integrity-servers/second-embedded-nic-takes-down-system/m-p/4631814#M6423 Hi Ross,<BR />iS theer any error indication on the front Panel?<BR /><BR />Did you Check for What MP log says ??<BR /> Wed, 12 May 2010 08:31:31 GMT https://community.hpe.com/t5/integrity-servers/second-embedded-nic-takes-down-system/m-p/4631814#M6423 S-M-S 2010-05-12T08:31:31Z