topic Re: rx5670 MFG mode password in Integrity Servers

rx5670 MFG mode password

Joshua Scoggins — Sun, 27 Jun 2010 23:24:33 GMT

Hello,

I just replaced the main system board on my RX5670 as the 12v rails were out and now the EFI will not allow me to choose anything but the efi shell as I am getting Error[55] which says invalid or inaccessible system id(s). I tried to use

sysmode service
sysset uuid

but it gives me an access denied due to it already being set, it is not set to magic.

When I do

sysmode mfg it asks me for a password but no challenge phrase to verify against sskey. Is there a default password for mfg or is generated differently for each board?

Re: rx5670 MFG mode password

Torsten. — Mon, 28 Jun 2010 03:04:22 GMT

What does this show?

Shell> sysmode service

Shell> sysset

Re: rx5670 MFG mode password

Joshua Scoggins — Tue, 28 Sep 2021 14:56:50 GMT

Alright here is the sysset output:

System Information:
Manufacturer: hp
Product Name: server rx5670
Product Number: AB213A
Secondary Product Number is Valid - Different
Serial number: ~~Confidential info erased~~
Secondary Serial Number is Valid - Different
UUID: 7EFF6E57-1662-11D9-808B-35D3D8C23E6B (Valid)
Secondary UUID is Valid - Different
Product ID: 0x201

Re: rx5670 MFG mode password

Torsten. — Thu, 01 Jul 2010 02:47:25 GMT

There is nothing you can do, except call HP support.

Re: rx5670 MFG mode password

DavidTurner — Tue, 28 Sep 2021 14:57:24 GMT

Did you ever figure out how to get into manufacturing mode (MFG) ?

I am desperately in need of this information. Let me know at ~~personal info erased~~

Re: rx5670 MFG mode password

Torsten. — Sun, 19 Sep 2021 15:06:41 GMT

There is nothing you can do, except call HP support.

It is a dynamic generated password.