https://community.hpe.com/t5/integrity-servers/how-to-get-ip-console/m-p/4699791#M6869 I Have rx5670 and i want to see server Logs via MP. I only see MAC Address for RJ-45 MP Port ?<BR /><BR />How to get IP Address Console. or Step by step to login console Via LAN ??<BR /><BR />Thanks Fri, 15 Oct 2010 03:16:47 GMT ndra 2010-10-15T03:16:47Z https://community.hpe.com/t5/integrity-servers/how-to-get-ip-console/m-p/4699791#M6869 I Have rx5670 and i want to see server Logs via MP. I only see MAC Address for RJ-45 MP Port ?<BR /><BR />How to get IP Address Console. or Step by step to login console Via LAN ??<BR /><BR />Thanks Fri, 15 Oct 2010 03:16:47 GMT https://community.hpe.com/t5/integrity-servers/how-to-get-ip-console/m-p/4699791#M6869 ndra 2010-10-15T03:16:47Z https://community.hpe.com/t5/integrity-servers/how-to-get-ip-console/m-p/4699792#M6870 First connect to the local console using a serial cable. <BR /><BR />Press Ctrl-B to access the MP menus.<BR /><BR />(Depending on the MP version, you may have to login and/or use the CM command to enter the Command Menu at this point. The factory default MP username/password is Admin/Admin.)<BR /><BR />Type "LC" to access the MP's LAN Configuration.<BR /><BR />Setup the MP LAN configuration to your requirements. (Setting up the MP usernames &amp; passwords is also recommended at this point.)<BR /><BR />Connect the LAN cable to the MP's RJ45 port.<BR /><BR />Verify you can connect to the MP using the IP address you configured.<BR /><BR />Exit the MP menus on the serial connection and disconnect the serial console cable.<BR /><BR />Now you have a working MP console over LAN.<BR /><BR />MK Fri, 15 Oct 2010 09:56:43 GMT https://community.hpe.com/t5/integrity-servers/how-to-get-ip-console/m-p/4699792#M6870 Matti_Kurkela 2010-10-15T09:56:43Z