topic Video in rx1600 in Integrity Servers

Video in rx1600

Jorge Pons — Tue, 16 Nov 2004 09:02:43 GMT

HI
We have several integrity servers, rx2600 and rx1600, we want use graphical console, but in rx1600 not have graphical interface.
I tried to install the graphical interface (also have RS-232, LAN) from rx2600 in rx1600, and works, but when it boot, the server craash.
I will try to reinstall the server with the interface install. I think it must work...
Anything was in this situation?
There is another solution for this problem?

Thanks in advance

Jorge

Re: Video in rx1600

Zygmunt Krawczyk — Tue, 16 Nov 2004 13:03:46 GMT

Hi Jorge,

you should buy the optional management processor card for rx1600 (product number A9803A). The card provides out of band management, remote web-based management and basic 2D graphics.

Regards,
Zygmunt

Re: Video in rx1600

Jorge Pons — Thu, 18 Nov 2004 04:59:28 GMT

Hi

We are waiting for this card, I hope this resolve the problem.

Thanks

Re: Video in rx1600

Jorge Pons — Thu, 02 Dec 2004 07:19:01 GMT

OK

I have the card, but I donÂ´t know which driver it must been installed to work fine.

Any ideas?

Thanks, Jor

Re: Video in rx1600

Ivajlo Yanakiev — Thu, 02 Dec 2004 08:04:45 GMT

Rx1600 is workstation. It support AGP card.
If you want to use Graphical console you need to set console output into EFI.
Use your PCI AGP for console output.
After taht save and restart.

RX2600 is server aware.
You don't have AGP port.
Any way you can use internal VGA to see graphics console. Also as I sed you need go to EFI nad set VGA as your console output.

EFI contain all driver that you need for graphical console. EFI partition can and must be update with last posible driver.
There was a problem with Video on EFI and Windows. Use lastest drivers.
Go to HP.com

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&pnameOID=406201&taskId=135&prodTypeId=15351&prodSeriesId=447332&submit.y=6&submit.x=7〈=en&cc=us

And update all that you need.

Re: Video in rx1600

Jorge Pons — Thu, 02 Dec 2004 08:14:33 GMT

OK Ivajlo

The situation is this: I plugged the a9803 Management card into rx1600, I configure in EFI like Output device, the rx run and I can see the console messages until /stand/vmunix, then, the system have a crash.
If I configure serial console like Output device, the rx run perfectly.
When I do a ioscan, I see this device:
/dev/diag/mux2 /dev/tty2p0 /dev/tty2p4
unknown -1 0/4/2/0 UNCLAIMED UNKNOWN PCI Display (1
0025159)

What is the correct driver for this card?
I think this is the problem

Thanks, Jorge

Re: Video in rx1600

Ivajlo Yanakiev — Thu, 02 Dec 2004 08:38:43 GMT

ooo wait :)

Do you sure that HPUX support VIDEO ??

Last that I know HPUX have not any driver for VIDEO on rx server
there are driver only for Linux and Windows :)

But that info is 10 week old :) My be now there is driver.
Look here /I do not find any Video drv/:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&pnameOID=406201&taskId=135&prodTypeId=15351&prodSeriesId=447332〈=en&cc=us&swEnvOID=7