https://community.hpe.com/t5/integrity-servers/npar-on-blade/m-p/4727349#M7095 According to all I know so far it is not supported and currently not planned. Thu, 16 Dec 2010 11:29:38 GMT Torsten. 2010-12-16T11:29:38Z https://community.hpe.com/t5/integrity-servers/npar-on-blade/m-p/4727348#M7094 Hi,<BR />is it possible to create npars in BL860C i2 blade?<BR />Thanks,<BR />n. Thu, 16 Dec 2010 11:09:20 GMT https://community.hpe.com/t5/integrity-servers/npar-on-blade/m-p/4727348#M7094 aaaA_4 2010-12-16T11:09:20Z https://community.hpe.com/t5/integrity-servers/npar-on-blade/m-p/4727349#M7095 According to all I know so far it is not supported and currently not planned. Thu, 16 Dec 2010 11:29:38 GMT https://community.hpe.com/t5/integrity-servers/npar-on-blade/m-p/4727349#M7095 Torsten. 2010-12-16T11:29:38Z https://community.hpe.com/t5/integrity-servers/npar-on-blade/m-p/4727350#M7096 nPars are planned for BL870c i2 (max 2 nPars) and for BL890c i2 (max 4 nPars). Currently nPars for these blades are not supported, and I hope it will be supported by the end 2011. Thu, 16 Dec 2010 12:00:25 GMT https://community.hpe.com/t5/integrity-servers/npar-on-blade/m-p/4727350#M7096 Zygmunt Krawczyk 2010-12-16T12:00:25Z https://community.hpe.com/t5/integrity-servers/npar-on-blade/m-p/4727351#M7097 Sounds like good news. Thu, 16 Dec 2010 12:37:02 GMT https://community.hpe.com/t5/integrity-servers/npar-on-blade/m-p/4727351#M7097 Torsten. 2010-12-16T12:37:02Z https://community.hpe.com/t5/integrity-servers/npar-on-blade/m-p/4727352#M7098 Hi As far as I know, The Integrity Blades are equivelent to Entry Level Server with enhanced mangemnt features.<BR /><BR />Teh Cell-Blade based concept with npar available in Superdome2.<BR /><BR />In Integrity Blade ,If The nPar concept is available in future, good one to have!<BR /><BR />HTH Thu, 16 Dec 2010 17:23:13 GMT https://community.hpe.com/t5/integrity-servers/npar-on-blade/m-p/4727352#M7098 S_Logan 2010-12-16T17:23:13Z